Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.

What are the advantages of lathe tool holders?

Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.

Why use lathe tool holders?

There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.

  • They can change the angle of the tool bit.
  • They can change the level of overhang in the tool bit.
  • They can direct fluid to the work area.
  • They may deflect the tool bit away from the piece when an excessive load is added.

71 Products showing for Lathe Tool Holders & Inserts

Sort By
In Stock
Pramet, 3.1 mm Height, 90 ° Approach, 3.1 mm Length
  • RS Stock No. 136-3972
  • Mfr. Part No. LFMX 3.1-.20TNF2:T8330 (X10)
Subtotal (10 units, in packs of 10)
$370.84(exc. GST)
$37.084/unit
In Stock
Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length
  • RS Stock No. 136-3987
  • Mfr. Part No. CNMG 120408E-SM:T7325
Subtotal (10 units, in packs of 10)
$369.24(exc. GST)
$36.924/unit
In Stock
Pramet, 90 ° Approach, 4.1 mm Length
  • RS Stock No. 136-3973
  • Mfr. Part No. LFMX 4.1-.20SNF2:T8330 (X10)
Subtotal (10 units, in packs of 10)
$371.99(exc. GST)
$37.199/unit
In Stock
Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length
  • RS Stock No. 136-8720
  • Mfr. Part No. TN 16ER200M:T8030
Subtotal (5 units, in packs of 5)
$324.93(exc. GST)
$64.986/unit
Stocked by manufacturer
Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length
  • RS Stock No. 136-8719
  • Mfr. Part No. TN 16ER175M:T8030
Subtotal (5 units, in packs of 5)
$271.57(exc. GST)
$54.314/unit
In Stock
Pramet, 3.97 mm Height, 93 ° Approach, 11.6 mm Length
  • RS Stock No. 866-0467
  • Mfr. Part No. DCMT 11T308E-FM:T9325
Subtotal (10 units, in boxes of 10)
$313.29(exc. GST)
$313.29/box
In Stock
Pramet, 3.18 mm Height, 16.5 mm Length
  • RS Stock No. 866-0524
  • Mfr. Part No. TPMR 160308E-61:T9325
Subtotal (10 units, in boxes of 10)
$282.71(exc. GST)
$282.71/box
In Stock
Pramet, 90 ° Approach, 2.2 mm Length
  • RS Stock No. 866-0366
  • Mfr. Part No. LFMX 2.2-.16SNM2:T8330
Subtotal (10 units, in boxes of 10)
$348.41(exc. GST)
$348.41/box
Stocked by manufacturer
Dormer, 7.94 mm Height, 95 ° Approach, 19.3 mm Length
  • RS Stock No. 728-960
  • Mfr. Part No. CNMX 190740SN-RF:T9415
Subtotal (10 units, in packs of 10)
$322.86(exc. GST)
$322.86/pack
In Stock
Pramet Positive Turning Insert for Use with T6310, 4.22 mm Height, 20 ° Approach, 4.22mm Length
  • RS Stock No. 263-7744
  • Mfr. Part No. CCGT 09T304E-SF3:T6310
Subtotal (10 units, in boxes of 10)
$409.16(exc. GST)
$409.16/box
Temporarily out of stock
Pramet Positive Turning Insert for Use with HF7, 25 ° Approach
  • RS Stock No. 263-7745
  • Mfr. Part No. CCGT 09T304F-AL:HF7
Subtotal (10 units, in boxes of 10)
$325.43(exc. GST)
$325.43/box
In Stock
Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length
  • RS Stock No. 136-8726
  • Mfr. Part No. TN 16ER130UN:T8030
Subtotal (5 units, in packs of 5)
$328.55(exc. GST)
$65.71/unit
In Stock
Pramet, 3.97 mm Height, 95 ° Approach, 9.7 mm Length
  • RS Stock No. 866-0534
  • Mfr. Part No. CCMT 09T304E-FF2:T8430
Subtotal (10 units, in boxes of 10)
$257.83(exc. GST)
$257.83/box
In Stock
Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length
  • RS Stock No. 136-3985
  • Mfr. Part No. CNMG 120408E-M:T9325
Subtotal (10 units, in packs of 10)
$350.24(exc. GST)
$35.024/unit
Temporarily out of stock
Pramet Positive Turning Insert for Use with T6310, 20 ° Approach
  • RS Stock No. 263-7742
  • Mfr. Part No. CCGT 060202E-SF3:T6310
Subtotal (10 units, in boxes of 10)
$359.65(exc. GST)
$359.65/box
In Stock
Pramet, 90 ° Approach, 3.1 mm Length
  • RS Stock No. 866-0360
  • Mfr. Part No. LFMX 3.1-.20SNM2:T8330
Subtotal (10 units, in boxes of 10)
$395.51(exc. GST)
$395.51/box
Temporarily out of stock
Pramet, 2.38 mm Height, 95 ° Approach, 6.4 mm Length
  • RS Stock No. 866-0420
  • Mfr. Part No. CCMT 060204E-FM:T9325
Subtotal (10 units, in boxes of 10)
$226.73(exc. GST)
$226.73/box
In Stock
Pramet, 3.18 mm Height, 16.5 mm Length
  • RS Stock No. 866-0512
  • Mfr. Part No. TPMR 160304E-47:T9325
Subtotal (10 units, in boxes of 10)
$298.42(exc. GST)
$298.42/box
Temporarily out of stock
Pramet Lathe Insert Removal Key for Use with Grooving Insert
  • RS Stock No. 866-0568
  • Mfr. Part No. KV 5X70
Subtotal (1 unit)
$11.19(exc. GST)
$11.19/unit
Currently unavailable
Pramet, 4.76 mm Height, 93 ° Approach, 11.6 mm Length
  • RS Stock No. 866-0414
  • Mfr. Part No. DNMG 110404E-FM:T9315
Subtotal (10 units, in boxes of 10)
$314.54(exc. GST)
$314.54/box
1
2
3
4
Results per page

Related links