Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the toolpost. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 1 - 20 of 84 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height
RS Stock No. 866-0332
Mfr. Part No.S16M-SCLCR 09-A
BrandPramet
$279.49
Each
units
95° Lathe Tool Holder SCLCR/L - - -
RS Stock No. 866-0335
Mfr. Part No.SDJCR 1616 H 11
BrandPramet
$214.75
Each
units
93° Lathe Tool Holder - - - -
RS Stock No. 866-0398
Mfr. Part No.PWLNR 2020 K 0604
BrandPramet
$221.37
Each
units
95° Lathe Tool Holder - - - -
RS Stock No. 866-0341
Mfr. Part No.A20Q-SDQCR 11
BrandPramet
$345.92
Each
units
107° Lathe Tool Holder - - - -
RS Stock No. 866-0518
Mfr. Part No.TNMA 160412:T5305
BrandPramet
$166.31
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm
RS Stock No. 866-0512
Mfr. Part No.TPMR 160304E-47:T9325
BrandPramet
$178.94
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 3.18mm
RS Stock No. 866-0477
Mfr. Part No.CNMG 120408E-FM:T9325
BrandPramet
$209.27
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0338
Mfr. Part No.DTGNR 2020 K 16
BrandPramet
$221.37
Each
units
90° Lathe Tool Holder - - - -
RS Stock No. 866-0401
Mfr. Part No.A20Q-PWLNR 0604
BrandPramet
$400.20
Each
units
95° Lathe Tool Holder - - - -
RS Stock No. 866-0489
Mfr. Part No.CNMG 120408E-M:T9335
BrandPramet
$209.27
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0473
Mfr. Part No.CNMG 120404E-FM:T9325
BrandPramet
$209.27
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0641
Mfr. Part No.S20Q-CTFPR 11
BrandPramet
$329.01
Each
units
91° Lathe Tool Holder - - - -
RS Stock No. 866-0486
Mfr. Part No.CNMG 120404E-M:T9335
BrandPramet
$197.02
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0515
Mfr. Part No.TNMG 160412E-R:T9335
BrandPramet
$182.97
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm
RS Stock No. 866-0467
Mfr. Part No.DCMT 11T308E-FM:T9325
BrandPramet
$195.13
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm
RS Stock No. 866-0483
Mfr. Part No.CNMG 120404E-FM:T9315
BrandPramet
$209.27
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm
RS Stock No. 866-0464
Mfr. Part No.DCMT 11T304E-FM:T9325
BrandPramet
$195.13
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm
RS Stock No. 866-0568
Mfr. Part No.KV 5X70
BrandPramet
$7.37
Each
units
- - - Grooving Insert - -
RS Stock No. 866-0408
Mfr. Part No.PWLNR 2525 M 0604
BrandPramet
$235.46
Each
units
95° Lathe Tool Holder - - - -
RS Stock No. 866-0556
Mfr. Part No.A08H-SCLCR 06
BrandPramet
$279.49
Each
units
95° Lathe Tool Holder - - - -
Related Products
TNGX Face Mill Kit A brand new economical ...
Description:
TNGX Face Mill Kit A brand new economical solution for 90° Shoulder Milling in Carbon Steel, Stainless Steel and Cast Iron These End Mill kits feature TNGX double-sided inserts that have 6 cutting edges making them extremely cost effective. The ...
Pramet Penta High Feed Face Mill Body PENTA ...
Description:
Pramet Penta High Feed Face Mill Body PENTA HF High Feed Milling Cutter for high metal removal rates when face milling Insert geometry and approach angle reduces power requirements Option of cylindrical shank or bore cutter Suitable for PDKX 09 ...
Pramet Econ LN Face Milling Set Exclusive RS ...
Description:
Pramet Econ LN Face Milling Set Exclusive RS only sets containing either a 40, 50 or 63mm ECON LN Face Milling Cutter plus 10 x LCMX120508ER-M:M8340 and 10 x LNGX120504FR-FA:HF7 Inserts A cost effective solution for shoulder milling Highly positive ...
RS Pro External Dead Centres RS Pro External ...
Description:
RS Pro External Dead Centres RS Pro External Dead Centres, used to support the workpiece at either the fixed or rotating end of the machine The tips of the centres have an insert of carbide which reduces the friction and ...