Schneider Electric Spacial SBM Series Steel Wall Box, IP66, 150 mm x 150 mm x 120mm

The Spacial SBM steel enclosures from Schneider Electric are available in three versions and are designed for use in industrial machine and building applications.
The wall mounting enclosures have a single piece rectangular body with folded gutters in the front and 2 (or 3*) drilled profiles for installing mounting plates and DIN rails in the rear, fixing centres of 12.5 mm.
The enclosure cover is equipped with a polyurethane sealing gasket and 2, 3, 4 or 6 half-turn threaded screws, depending on the version (**). An M6 x 16 earth stud is welded in the cover to provide equipotential connection with the body.

• 28 sizes available increasing to 42 by using the extension box accessory
• 80mm and 120mm depths available, with or without pre-built FL 21 cable entries
• IP66 protection meaning the enclosures are dust tight and protect against powerful jets of water and heavy seas
• External mechanical impact resistance of up to IK10 (joules 20) meaning the wall box gives protection against a 5 kg object dropped from 40 cm in height
• Can be Installed with just a screwdriver
• Direct fixing though the rear or with external mounting lugs
• Protected inside and outside with polyester grey paint, RAL 7035
• Attractive and tough design for protection of sensitive electronics

The Spacial SDB range from Schneider are suitable for use in underground parking, road and railway tunnels.

(*) 3 profiles for width 800 mm, (**) 2 for Bus box (3 screws for width greater than 400 mm), 4 for Flat and Entry boxes (6 screws for width greater than 400 mm).

Need durable protection for your sensitive industrial components? Grab this wall box from Schneider Electric. It's impact-resistant against forces of up to 20J, so it shrugs off the demands of heavy-duty settings. As this hardy piece of kit can handle temperatures between -35°C and +80°C, it's at home in extreme conditions. Single-piece construction means it provides a highly effective barrier against environmental factors such as dust, moisture and air-borne contaminants. Compact external dimensions of just 150 (H) x 150 (W) x 120mm (D) fit comfortably in cramped conditions, making this a space-saving solution for a busy working environment.

• Captive screws in the cover lid won't get lost during installation for hassle-free set-up
• IP66 rating indicates it keeps internal components dry against high-power jets from all directions
• Robust sheet steel material is well-suited to challenging applications
• Polyester powder coating is corrosion-resistant for a long service life

• Underground parking facilities
• Railway industry
• Factory floors

For flexible use, this rugged enclosure has a loading capacity of 50kg/m² on the body.

BV, DNV, GL, LR, UL.

IEC 62208.