Recom Switching Regulator, Through Hole, 12V dc Output Voltage, 15 → 42V dc Input Voltage, 1A Output Current, 1

R-78C 1.0 1A SIP3 single output DC to DC converter which is pin compatible with LM78XX linear regulators. The high efficiency of these SIP3 single output DC to DC switching regulators means that there is no need for heatsinks as very little energy is wasted.

High efficiency of 96%
Low profile design: L11.6mm x W8.5mm x H10.4 mm
Wide input voltage range
Short circuit protection and thermal shutdown
Low ripple and noise
EMC compliance to EN55022 Class B

MTBF to MIL-HDBK 217F
Power derates above 68°C

General safety: EN 60950-1:2006 + A11:2009 + A1:2010
Standby power: EN62301:2005

Step down the voltage supply in your system with this single-output switching regulator from RECOM. It accepts input voltages between 15 and 42V DC and converts them to an output voltage of 12V DC to provide steady power to your low-voltage devices. For additional electrical safety, it has built-in short circuit protection. Thanks to its small dimensions of 11.6 (L) x 8.5 (W) x 10.4mm (H), this unit takes up minimal space in your setup.

• Mean time between failures of 8,600,000 hours at +25°C for long-term reliability
• High efficiency of 92 to 96% to limit energy waste and optimise performance
• Light weight of 2g minimises strain on the mounting surface
• Non-conductive plastic case reduces the risk of electric shocks to boost workplace safety
• Thermal shutdown feature prevents overheating

• Digital cameras
• Handheld gaming consoles
• Portable controllers

This switching regulator has a wide operating temperature range between -40°C and +85°C, making it a good choice for use in harsh industrial environments.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.