Honeywell GLA Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 10A

RS Stock No.:: 217-7129
Distrelec Article No.:: 303-01-500
Mfr. Part No.:: GLAB01A1A
Brand:: Honeywell

Honeywell GLA Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 10A

Subtotal (1 unit)*

$408.11

(exc. GST)

$448.92

(inc. GST)

Stock information currently inaccessible - Please check back later

Units	Per unit
1 +	$408.11

*price indicative

RS Stock No.:: 217-7129
Distrelec Article No.:: 303-01-500
Mfr. Part No.:: GLAB01A1A
Brand:: Honeywell

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Series	GLA
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Depth	31.1mm
	Width	30.5mm
	Length	110mm
	Standards/Approvals	UL, CSA, CE, CCC, RoHS
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles
	Mounting Orientation	Multi Directional

	Select all
	Brand Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Series GLA
	Minimum Operating Temperature -40°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Depth 31.1mm
	Width 30.5mm
	Length 110mm
	Standards/Approvals UL, CSA, CE, CCC, RoHS
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles
	Mounting Orientation Multi Directional

Honeywell Limit Switch, Roller Lever Actuator, 10A Switching Current - GLAB01A1A

This limit switch is a robust industrial control device designed to detect mechanical movement and provide discrete electrical signalling in automation and machinery applications. Housed in a corrosion-resistant die-cast zinc enclosure, it is suitable for environments where ingress protection and reliable snap-action switching are required. The unit uses a roller lever actuator and a screw-terminal Interface to integrate with control circuits and protective conduits.

Features and Benefits:

• IP67-rated enclosure for protection against dust and water ingress
• Snap-action contacts for fast, decisive switching performance
• SPDT contact arrangement enabling changeover switching capability
• 10A switching current for handling moderate load circuits
• 600V AC switching rating for high-voltage control applications
• Mechanical life of 10 million cycles for extended duty operation

Applications

• Suitable for actuator end-of-travel detection on production lines
• Ideal for conveyor position sensing in material handling systems
• Used for limit monitoring on industrial presses and tooling
• Can be used for door position feedback in heavy-duty enclosures
• Used with safety interlocks requiring rugged environmental sealing

What temperature range can it operate within?

It functions across a wide ambient span from -40°C up to a maximum of 85°C, supporting installations in cold storage or near heat-generating equipment.

How is electrical connection implemented for field wiring?

Field conductors terminate to screw-type terminals and a PG13.5 conduit entry accommodates common cable glands for secure routing.

Which approvals support its use in regulated installations?

It carries UL, CSA, CE, CCC and RoHS approvals, permitting deployment where recognised safety and material standards are required.

Can it be oriented in different mounting positions?

The design accepts multi-directional mounting, allowing flexible installation angles without affecting switch actuation.