Honeywell GLB Series Roller Lever Limit Switch, 1 NO/1 NC, IP67, Die Cast Zinc Housing, 600V ac, 10A

RS Stock No.:: 207-1969
Mfr. Part No.:: GLBC02A1B
Brand:: Honeywell

Honeywell GLB Series Roller Lever Limit Switch, 1 NO/1 NC, IP67, Die Cast Zinc Housing, 600V ac, 10A

Currently unavailable

We don't know if this item will be back in stock, RS intend to remove it from our range soon.

Alternative

This product is not currently available. Here is our alternative recommendation.

Honeywell GLF Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 600V ac, 6A

RS Stock No.: 186-8497

Each

$748.54

(exc. GST)

$823.39

(inc. GST)

RS Stock No.:: 207-1969
Mfr. Part No.:: GLBC02A1B
Brand:: Honeywell

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	IP Rating	IP67
	Contact Configuration	1 NO/1 NC
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	M20
	Switching Current	10A
	Series	GLB
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	62mm
	Standards/Approvals	CE, UL, CSA, CCC
	Length	145.8mm
	Width	42mm
	Hazardous Area Certification	NO
	Conduit Entry	PG13.5
	Operating Force	0.33Nm
	Mechanical Life	15000000Cycles

	Select all
	Brand Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	IP Rating IP67
	Contact Configuration 1 NO/1 NC
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type M20
	Switching Current 10A
	Series GLB
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 62mm
	Standards/Approvals CE, UL, CSA, CCC
	Length 145.8mm
	Width 42mm
	Hazardous Area Certification NO
	Conduit Entry PG13.5
	Operating Force 0.33Nm
	Mechanical Life 15000000Cycles

Honeywell GLB Series Limit Switch, 145.8mm Length, Die Cast Zinc Housing - GLBC02A1B

This limit switch is a rugged industrial device designed to detect mechanical position changes and provide discrete electrical switching in automation and control systems. It features a roller lever actuator and a snap-action contact mechanism to deliver precise switching operations across electrical circuits in demanding environments.

Features and Benefits:

• Die-cast zinc housing for robust mechanical protection
• IP67 ingress rating enabling operation in wet or dusty conditions
• 1NO/1NC contacts handling up to 10A switching current
• 600V AC and 250V DC switching capacity for varied supply systems
• Operating temperature range from -25°C to 85°C for wide thermal tolerance
• Mechanical life rated to 15 million cycles for extended duty

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for limit sensing on industrial presses and cutters
• Used with automated gantries for position feedback
• Can be used for safety interlocks on access panels
• Suitable for packaging machinery repeatable position control

What conduit and Terminal provisions are available for wiring?

The device accepts a PG13.5 conduit entry and uses an M20 Terminal arrangement for electrical connection.

How does the actuator perform under repeated cycling?

The roller lever actuator operates silvered snap-action contacts designed to maintain switching precision through high-frequency mechanical cycles.

What approvals support use in regulated installations?

The unit carries CE, UL, CSA and CCC approvals suitable for multiple regional compliance requirements.

What is the expected torque for actuation and how does it affect installation?

The operating torque is specified as 0.33 Nm, which informs mounting and lever alignment to ensure reliable actuation.

Approvals

UL/ UL listed for Canada

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and control gear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLB limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.