WAGO 770 Series Lighting Connector, 3-Pole, Male, 3-Way, Flush Mount, 25A

From Wago, the 770 series of lighting connectors feature robust strain-relief and a fool-proof connector to prevent connection errors. These lighting connectors are designed for quick and easy manual disconnect. The connectors are 3-pole, with 2-conductors and 2 connection points per pole.

Features and Benefits:
• Connectors with 2 through-holes for rapid mounting onto a support
• Integrated test points on male and female connectors, making it easier to test without disconnecting
• Cable entry size: 2 x 0.5 → 4 mm²
• Connection: CAGE CLAMP®S rising clamp
• Diameter of cable grip: 8 → 11.5 mm

Link your bulb or LED component to a power source using this lighting connector from WAGO. It has two terminals on each of its three poles, so you can attach up to six conductors for a robust multi-signal setup. A cable diameter range between 8 and 11.5mm means you'll have enough room to house your small and medium-sized cables. Thanks to its simple push-in clamp termination design, you can slot your wires into this unit in a flash without having to reach for your tools.

• Current rating of 25A for use in high-power systems
• Built-in strain relief protects cable from wear
• Integrated test points for hassle-free troubleshooting
• Insulating PA66 housing helps prevent electrical hazards
• Copper alloy contacts are highly conductive and corrosion-resistant for reliable current transmission

• Medical technology
• Agricultural equipment
• Robotics systems
• Aerospace engineering
• Consumer electronics

It can handle up to 200 mating cycles, so you can safely plug and unplug this connector multiple times over the course of its service life.

The cage clamp terminals of this connector are made from tough chrome-nickel spring steel that stands up to impact and corrosion.