RS PRO 1.75mm Natural PVA 3D Printer Filament, 500g

RS Stock No.:: 832-0490
Brand:: RS PRO

RS PRO 1.75mm Natural PVA 3D Printer Filament, 500g

89 In Global stock for delivery within 10 working day(s)

Price (ex. GST) Each

$107.34

(exc. GST)

$118.07

(inc. GST)

Units	Per unit
1 - 2	$107.34
3 +	$106.01

RS Stock No.:: 832-0490
Brand:: RS PRO

RS PRO 3D Printer Filament PVA 2.85mm

This PolyVinyl Alcohol (PVA) filament from our high-quality own brand RS PRO offers excellent adhesive properties, high tensile strength and flexibility. It is resistant to oil as well as grease and solvents.

Benefits

Perfect supporting material for dual extruder 3D printer

Dissolvable in water, making it a fantastic choice for a support material

A suitable primary material would be PLA

Unsuitable material would be ABS as that requires a bed temperature (90°C) that is above the glass temperature (62°C) of the PVA support filament

Cold water will get the job done, but for more speedy results, try warm water

Can use to create water-soluble moulds for ideal casting without the worry of ruining the cast when removing the mould

PVA is odourless, non-toxic, and biodegradable, which makes it safe for humans, animals and environment

Features

The recommended temperature for a heated bed is ± 35-60ﾟC

Melting temperature - 163 °C

Density - 0.75g/cm³

The damp filament can be dried at 50-55°C for 8-12 hours in a circulating air dryer

Applications

PVA is commonly used in the production of paper, adhesives, dissolvable packagings such as those seen in single-use detergent capsules, printing, eye drops, and textiles.

In 3D printing, it is often used as a support material for intricate printing.

Print Surface Materials

Some bed surfaces may need extra help in maintaining good adhesion. Use of washable surface treatment such as 3DLAC or PVA filament dissolved in a little water and applied to the bed before printing can improve the situation drastically.

Always degrease the print surface before each print.

Advice

Do not keep the filament idle in the nozzle at 180°C or over for more than 5 minutes as it will hydrolyse in the nozzle and therefore block the nozzle.

Must be kept in a sealed bag or container witch active desiccant when not in use

Dry PVA filament before each use

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Note

PVA can be used on all common desktop FDM or FFF technology 3D printers

Attribute	Value
Material Type	Support
Printing Technology	FDM
Machine Specific	No
Colour	Natural
For Use With	Dual Extrusion
Weight	500g
Diameter	1.75mm
Printing Material	PVA