Sensata Crydom D2W Series Solid State Relay, 3 A Load, PCB Mount, 280 V rms Load, 32 V dc Control

When you need to safely switch a circuit but space is at a premium, opt for this PCB-mounted solid-state relay from Sensata | Crydom. Thanks to its diminutive dimensions of just 43.2 (L) x 11.9 (W) x 29.9mm (H), this miniature marvel will fit comfortably in the tightest of spots. It's a zero-cross switching type, meaning it won't connect the output to the load until the waveform is at 0V. This makes it a safe choice for delicate components like incandescent bulbs that can be damaged by high in-rush currents. Thanks to the triac output type, this device is ideally suited to low-power AC loads, including motor starters, lights and contactors.

• Internal snubber network offers an extra layer of protection against electrical faults
• Wide operating temperature range between -30°C and +80°C for use in extreme conditions
• Featherlight weight of 17g to place minimal strain on your equipment

This relay features an SPST configuration, meaning it has one position and can be used to control a single circuit.

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.

Derating will limit the maximum load current at temperatures above 25°C

UL; CSA