RE210-S2, Single Sided Matrix Board with 38 x 85 1mm Holes, 2.54 x 2.54mm Pitch, 220 x 100 x 1.5mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): BE
Product Details

RE210-S1 / S2 / S3 laboratory cards

Laboratory cards made from CEM3, 1.5 mm
Hot tin-plated (HAL lead-free)

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specifications
Attribute Value
Number of Sides Single Sided
Hole Pitch 2.54 x 2.54mm
Dimensions 220 x 100 x 1.5mm
Length 220mm
Width 100mm
Thickness 1.5mm
Base Material CEM3
Hole Diameter 1mm
Hole Layout 38 x 85
Copper Thickness 35µm
Stock check temporarily unavailable - call for stock availability
Price (ex. GST) Each
Was $10.43
$ 8.21
(exc. GST)
$ 9.03
(inc. GST)
units
Per unit
1 - 9
$8.21
10 - 19
$7.98
20 - 49
$7.71
50 +
$7.18
Related Products
Breadboards, KH – 102 Development System Our own ...
Description:
Breadboards, KH – 102 Development System Our own RS Pro breadboard makes a practical and great use in everyone’s electrical kit It provides you an efficient and effortless way to easily test or learn circuitry. The breadboard is also ideal ...
Copperless Boards Completely drilled boards, designed for the ...
Description:
Copperless Boards Completely drilled boards, designed for the development of prototypes of analogue circuitsThanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to ...
Eurocards: Lined on each side with through-hole Quadratic ...
Description:
Eurocards: Lined on each side with through-hole Quadratic soldering islands reduce risk of lifting during soldering Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with ...
Square pad cards Single-sided boards for wiring by ...
Description:
Square pad cards Single-sided boards for wiring by wrapping, with optimum flexibility and maximum densityThe DIP sockets are held in place by soldering the outer pins to the corresponding square pads.Reference grid on both sides of the board, facilitating wiring ...