Eaton 2 x 18 W Light Fitting Hazardous Area Light, 1, 2, Twin Fluorescent, Temp T4, 120 → 240 V ac, ATEX

RS Stock No.:: 327-2573
Mfr. Part No.:: 12265875111
Brand:: Eaton

Eaton 2 x 18 W Light Fitting Hazardous Area Light, 1, 2, Twin Fluorescent, Temp T4, 120 → 240 V ac, ATEX

Subtotal (1 unit)**

$1,578.60

(exc. GST)

$1,736.46

(inc. GST)

3 In AU stock for next working day delivery*

25 In Global stock for delivery within 10 working day(s)

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over $80.00 ex GST

Units	Per unit
1 +	$1,578.60

**price indicative

RS Stock No.:: 327-2573
Mfr. Part No.:: 12265875111
Brand:: Eaton

Zone 1 & 2 Ex-e

The Eaton CEAG Crouse-Hinds eLLK 92 range of linear luminaires for fluorescent lamps combine the latest lighting technology with the requirements of a harsh and hazardous environment. These explosion-proof hazardous area lights are designed with safety in mind and can be easily connected to a CEAG emergency lighting supply system. This hazardous area lighting provides illumination and excellent light output in areas where other light sources would be unsuitable.

Features and Benefits

Uses twin T8 linear fluorescent tubes
Easy installation
Suitable for offshore environments
Hinged access to terminal compartment with 6mm terminals at both ends allowing through wiring
Integral switch isolates the lamps when cover is removed
High frequency electronic ballast
Smooth outer surface for easier cleaning
Lightweight polycarbonate and GRP housing

Certificate No.

PTB 96 ATEX 2144

Group and Category

II 2 G EX eds IIC T4 for Zones 1 & 2

Eaton CEAG Twin Fluorescent Hazardous Area Light, 18W, 180mA - 12265875111

Illuminate hazardous areas in your workplace with this durable area light from Eaton CEAG. The unit features two energy-efficient 18W light-emitting diode (LED) lamps that are designed to deliver plenty of light with minimal power consumption.
The lamps are shielded by a housing made of polycarbonate and glass-reinforced polyester (GRP) material. This isn't just impact-resistant, it's also able to withstand explosions. You can use this unit in marine and industrial environments, where it can be connected to an emergency lighting supply source.

Features & Benefits

• Smooth outer surface for easy cleaning
• Integral switch isolates the lamp when its cover is removed for improved electrical safety
• A standard dual ballast is included for current regulation and energy efficiency
• IP66 (ingress protection) rating indicates resistance to dust and high-pressure water jets
• Current rating of 180mA for energy conservation

How do I mount this component?

This area light is designed for ceiling mounting. It has a protective bowl that can be screwed in on both sides so you can mount it on either axis. Single-ended through wiring allows for simple installation.

Note

Eaton formerly known as CEAG

Approvals

Group & Category: II 2 G EX eds IIC T4 for Zones 1 & 2
Certificate No. PTB 96 ATEX 2144

Attribute	Value
Type	Light Fitting
Zone Classification	1, 2
Temperature Classification	T4
Wattage	2 x 18 W
Lamp Type	Twin Fluorescent
Voltage Rating	120 → 240 V ac
Lamp Size	T8
Length	760 mm
Width	188 mm
Individual Lamp Wattage	18W
Number of Lamps	2
Hazardous Area Certification	ATEX
Standards Met	CSA
Current Rating	180 mA