Facom 985 Ratchet Crimp Tool for Insulated Terminal

  • RS Stock No. 384-9050
  • Mfr. Part No. 985895
  • Manufacturer Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Serkan ergonomic crimp tools with ratchet system

Facom crimp tools are known from its durability and the highest quality. Designed with the professionals and most demanding customers in mind. The best lightweight but durable materials used for production guarantee long life and hassle-free operation. Handles have been shaped for increased anti-slip, safety and comfort so even long operating is injury free.

Features and Benefits:
• High-performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles)
• Double crimping (pre-insulated terminals)
• Reverse crimping: terminal is placed in the fixed part for greater precision
• Stainless steel dies
• Ambidextrous pliers

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

High performance crimp tools with ratchet system (maximum tested capacity over 50000 cycles).
Double crimping (pre-insulated terminals). Reverse crimping: terminal is placed in the fixed part for greater precision. Stainless steel dies. Ambidextrous pliers.
Available in 2 models: 1 model for pre-insulated terminals (985894) in compliance with standard IEC 760 and 1 model for cable ends (985895) in compliance with standard NFC 63-023.

Technical specifications
Pliers for pre-insulated terminals: crimping capacity from 0.5 → 6 mm2
Pliers for cable ends: crimping capacity from 0.5 → 6 mm2
Specifications
Attribute Value
Series 985
Crimp Tool Type Ratchet
Crimp Connector Type Insulated Terminal
Overall Length 230mm
1 : Next working day (AU stock)
71 : 5 working days (Global stock)
Price (ex. GST) Each
$ 140.01
(exc. GST)
$ 154.01
(inc. GST)
units
Per unit
1 +
$140.01
Related Products
The crimp tooling detailed on this and subsequent ...
Description:
The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for ...
Suitable for QM single and two piece contacts. ...
Description:
Suitable for QM single and two piece contacts. Plier tool can also be used to crimp contacts for the Circular Sealed Industrial IP67 connector range and the Sealed Industrial IP68 connector range stock no. 489-526. Instructions supplied with tools. RF ...
Han M23 crimping tool for signal contact. Size ...
Description:
Han M23 crimping tool for signal contact. Size M23High contact densityRobust hoods and housings for industrial applicationsAssembly requires no toolsGood EMC properties6 to 19 contacts Crimp, solder and PCB solder connections.
Self-adjusting wire end ferrule tool with front operationAs ...
Description:
Self-adjusting wire end ferrule tool with front operationAs opposed to front entry, single-sided open profile enables a contact from 0.08 → 2.5 mm2 to be input from the side (improved access)Adjusts automatically to different cable cross-sectionsProduces a square crimp profile ...