Heat Guns | Cordless Heat Gun | RS
Recently searched

    Heat Guns

    Heat Guns are handheld tools that use a stream of hot air which is heated by a built-in element at temperatures between 100°C and 550°C. Heavy-duty heat guns operate at hotter temperatures of plus 700°C. Heat Guns allow you to concentrate the heat onto a targeted area or surface and also give you control using the on and off trigger. If you need advice on how to use these tools, you can consult our Heat Guns Guide.

    How A Heat Gun Works

    The heat used by the Heat Gun is produced by a fan built into the back of the gun within the gun which draws air in and then passes the cold air over the heating elements which then creates the required stream of hot air.

    How To Use A Heat Gun

    • Heat Guns should be held at an angle of 45° from the area you target but never hold the stream of heated air in one place for more than a few seconds. This could damage and burn your work surface.
    • When stripping paint from a surface use the Heat Gun to soften the paint until it bubbles and blisters.
    • Remove the Heat Gin from the surface then use a scraping tool to remove the paint from the work surface.

    Uses for Heat Guns

    • Stripping Paint including lead paint (lead paint, use temperatures below 590° minimising vaporisation)
    • Heat Shrink Tubing
    • Shrink Film
    • Shrink Wrap Packaging
    • Wood - helps to dry out damp wood
    • Plastic – assists help in welding, bending and shaping plastic
    • Adhesive softening
    • Thawing frozen pipes
    • Electronics – De-soldering
    • Rework surface-mounted circuit boards

    19 Products showing for Heat Guns

    Steinel
    Heat Gun
    500L/min
    2kW
    -
    230V
    600°C
    Type I - Australian plug
    34mm
    840g
    HL 1920 E
    Steinel
    -
    200L/min
    -
    Cordless
    18V
    500°C
    -
    -
    -
    MH3
    SAM
    -
    -
    2000W
    Corded
    -
    -
    -
    -
    -
    DT-20
    Rapid Agrafage
    Heat Gun
    -
    -
    Cordless
    18V
    550°C
    -
    -
    -
    5001513
    SAM
    Heat Gun Surface Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    DT-20-A
    Steinel
    -
    800L/min
    3.4kW
    -
    230V
    +600°C
    Type I - Australian plug
    50mm
    1.2kg
    HG5000E
    Steinel
    -
    300L/min
    -
    Cordless
    18V
    500°C
    -
    -
    -
    MH5
    Steinel
    Heat Gun Reflector Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    74616
    Steinel
    Heat Gun Reflector Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0705191
    SAM
    Heat Gun Surface Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    N1877-1.
    SAM
    Heat Gun Reduction Nozzle
    -
    -
    Cordless
    ΩV
    -
    -
    -
    -
    DT-20-G
    SAM
    Heat Gun Reduction Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    DT-20-E
    Steinel
    Heat Gun Angle Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    0928181
    Steinel
    Heat Gun Welding Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0709151
    Steinel
    Heat Gun Flat Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    40X2 HG4000E
    Steinel
    Heat Gun Window Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0704101
    Steinel
    Heat Gun Flat Nozzle
    -
    -
    -
    -
    600°C
    -
    -
    -
    0923131
    Steinel
    Heat Gun Surface Nozzle
    -
    -
    -
    -
    650°C
    -
    -
    -
    0702121
    SAM
    Heat Gun Reflector Nozzle
    -
    -
    Cordless
    -
    -
    -
    -
    -
    DT-20-F
    Results per page

    Popular Searches