Common Mode Chokes | CM Choke Filters | RS
Recently searched

    Common Mode Chokes

    Common mode (CM) chokes are a type of electrical filter that reduces unwanted interference, by blocking high frequency noise but lets the desired signal to pass. Common mode noise current is usually found in sources such as unwanted radio signals, unshielded electronics, inverters and motors. If this noise is not filtered, then it can cause problems in your electronics and electrical circuits.

    RS have a great range of inductors including these common mode chokes with various inductance values and offer high attenuation over a wide frequency range.

    Why use common mode chokes?

    Common mode chokes can be used to help the prevention of electromagnetic interference and radio frequency interface. By using these chokes you can help stop your electronic devices from malfunctioning.

    Things to consider before purchasing a common mode choke:

    • Impedance
    • Frequency bandwidth
    • Current handling

    Typical Applications include:

    Common mode chokes are often used in electrical, industrial and telecommunication applications to help reduce or remove noise and electromagnetic interference. They can be found in:

    • Data storage systems
    • Digital video camera
    • Industrial systems
    • Professional audio

    1419 Products showing for Common Mode Chokes

    KEMET
    3.2 mH
    SCF
    -
    40 MHz
    6.43mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    220 μH
    SCF
    -
    40 MHz
    0.65mΩ
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Schurter
    230000 μH
    DKIV-1
    -
    1.04 MHz
    1.7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    Wurth Elektronik
    2 x 1.6 mH
    WE-CMBHV
    -
    10 KHz
    2 x 8.5mΩ
    16.4 A
    46.5 x 28 x 44.5mm
    -40°C → +125°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    1.8 mH
    DKIV-1
    -
    10.3 MHz
    1.7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    KEMET
    400 μH
    SCF
    -
    40 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    400 μH
    SCF
    -
    40 MHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    127 μH
    HHBC
    -
    100 kHz
    31.7mΩ
    6 A
    30 (Dia.) x 16.2mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    4 mH
    DKIH-4
    -
    4.8 MHz
    4.33mΩ
    12 A
    58 (Dia.) x 31mm
    -40°C → +100°C
    -
    -
    Flange Mount
    760V
    Through Hole
    -
    KEMET
    10 μH
    SC-D
    -
    100 KHz
    8mΩ
    20 A
    34 x 23 x 34mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    7.2 mH
    DKIV-1
    -
    1.26 MHz
    7mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    Schurter
    750 μH
    DKIH-4
    -
    15.4 MHz
    0.55mΩ
    32 A
    58 (Dia.) x 31mm
    -40°C → +100°C
    -
    -
    Flange Mount
    760V
    Through Hole
    -
    EPCOS
    1.5 mH
    B82727E
    0.017 Ω
    50 Hz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    Schurter
    750 μH
    DKIH-4
    -
    15.4 MHz
    0.44mΩ
    40 A
    58 (Dia.) x 31mm
    -40°C → +100°C
    -
    -
    Flange Mount
    760V
    Through Hole
    -
    KEMET
    3 mH
    SC-J
    -
    100 KHz
    30mΩ
    10 A
    34 x 24 x 33mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Wurth Elektronik
    10 mH
    WE-CMB
    -
    10 kHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    39 μH
    SHBC
    -
    100 kHz
    6.8mΩ
    30 A
    50.1 (Dia.) x 25.7mm
    -40°C → +125°C
    2
    -
    Through Hole
    -
    Solder Pad
    -
    Schurter
    7.2 mH
    DKIV-1
    -
    3.62 MHz
    2.6mΩ
    -
    -
    -
    2
    -
    -
    -
    -
    -
    Wurth Elektronik
    47 mH
    WE-FCLP
    -
    10 kHz
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    KEMET
    500 μH
    SC-J
    -
    100 KHz
    8mΩ
    15 A
    34 x 23 x 33mm
    -25°C → +120°C
    -
    -
    Through Hole
    -
    Solder Pad
    -
    Results per page