Penta Beige Latex Electrical Protection Electrical Insulating Gloves, Size 9, Large, Latex Coating

The latex insulating gloves have an ergonomic shape plus are lightly powdered on the inside to ensure the gloves are easy to slip on and off. Due to the gloves natural latex base they offer you high dielectric characteristics. The gloves must be used with a leather over glove for mechanical protection.

FEATURES:
Glove Class 1
Used for operating voltage 7500 V
Mechanical resistance with a leather over glove
High dielectric characteristics
Ergonomic shape
Lightly powdered
Easy to slip on and off
Natural latex base
Must be used with a leather over glove
Length 360 mm
Colour – Beige
Cut Edges
Category AZC
Various sizes available

EN 60 903:2003 et CEI 60 903:2002
PPE Category III = Irreversible risks

Glove Class 1, Category AZC

The Sibille reusable work gloves are a natural colour, high-quality, latex material for electricians making up a part of your personal protection equipment. This insulating safety work glove made from non-conductive natural rubber combines high dielectric and high strength grip with excellent electrical resistance. Capable of working voltage to 7500 V ac, and is tested to 10000 V ac this Class 1 safety glove is capable of withstanding high voltages whilst still holding its core properties. This work glove is anatomically shaped, flexible and durable offering maximum comfort and superior performance. A specially formulated exterior coating helps to ensure a positive grip in wet conditions and is to slip on and off. Each pair is electrically tested to meet standards.

Electrical insulating gloves can be used both in indoor and outdoor working environments:

Electrical gloves need to be tested twice a year to ensure they are protecting you against low, medium and high voltages. Ensure to check the stamped dates on the gloves.

It is important to air test these gloves before using to check for any holes as it could be dangerous. This can be done by blowing air into the glove and trapping it inside if no air leaks out then the glove is safe to use.

Glove Class 1, Category AZC
EN 60 903:2003
IEC 60 903:2002
PPE Category III = Irreversible risks