FTDI Chip, USB Controller, 5.25 V, USB 2.0, 6 V, 32-Pin QFN EP
- RS Stock No.:
- 216-2600
- Mfr. Part No.:
- FT232RQ-TRAY
- Brand:
- FTDI Chip
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each (In a Tray of 490)
$6.035
(exc. GST)
$6.638
(inc. GST)
- RS Stock No.:
- 216-2600
- Mfr. Part No.:
- FT232RQ-TRAY
- Brand:
- FTDI Chip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Product Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Sub Type | Controller | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Supply Voltage | 6V | |
| Mount Type | Surface | |
| Package Type | QFN EP | |
| Pin Count | 32 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Series | FT232R | |
| Standards/Approvals | No | |
| Height | 0.9mm | |
| Width | 5 mm | |
| Length | 5mm | |
| Automotive Standard | No | |
| Supply Current | 15mA | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Product Type USB Controller | ||
USB Specification USB 2.0 | ||
Sub Type Controller | ||
ESD Protection Yes | ||
Maximum Supply Voltage 5.25V | ||
Minimum Supply Voltage 6V | ||
Mount Type Surface | ||
Package Type QFN EP | ||
Pin Count 32 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Series FT232R | ||
Standards/Approvals No | ||
Height 0.9mm | ||
Width 5 mm | ||
Length 5mm | ||
Automotive Standard No | ||
Supply Current 15mA | ||
The FTDI Chip USB to serial UART interface with Single chip USB to asynchronous serial data transfer interface. Entire USB protocol handled on the chip. No USB specific firmware programming required.
USB 2.0 full speed compatible
-40°C to 85°C extended operating temperature range
UART signal inversion option
Configurable I/O pin output drive strength
Related links
- FTDI Chip FT232RQ-TRAY 5.25 V 6 V, 32-Pin QFN EP
- FTDI Chip 5.25 V 5 V, 48-Pin LQFP
- FTDI Chip 1.98 V 1.8 V, 32-Pin QFN
- FTDI Chip FT2232D-TRAY 5.25 V 5 V, 48-Pin LQFP
- FTDI Chip FT232BL-TRAY 5.25 V 6 V, 32-Pin LQFP
- FTDI Chip 5.25 V SPI UART 48-Pin LQFP
- FTDI Chip 1.98 V 1.8 V, 64-Pin LQFP
- FTDI Chip 5.5 V 5.5 V, 24-Pin QFN