FTDI Chip UART 16-Pin SSOP, FT230XS-R
- RS Stock No.:
- Mfr. Part No.:
- FTDI Chip
|units||Per unit||Per Pack*|
|2 - 8||$3.27||$6.54|
|10 - 38||$3.23||$6.46|
|40 - 98||$3.165||$6.33|
|100 - 198||$3.095||$6.19|
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
|Number of Channels per Chip||1|
|Standard Supported||RS232, RS422, RS485, SIE, UART|
|Maximum Data Rate||3MBd|
|Transmitter and Receiver FIFO Counter||Yes|
|Mounting Type||Surface Mount|
|Typical Operating Supply Voltage||5 V|
|Dimensions||0.197 x 0.157 x 0.059in|
|Maximum Operating Temperature||+85 °C|
|Minimum Operating Temperature||-40 °C|