Schneider Electric Self Tapping Screw, M5 x 10mm Long

The Spacial SBM steel enclosures from Schneider Electric are available in three versions and are designed for use in industrial machine and building applications.
The wall mounting enclosures have a single piece rectangular body with folded gutters in the front and 2 (or 3*) drilled profiles for installing mounting plates and DIN rails in the rear, fixing centres of 12.5 mm.
The enclosure cover is equipped with a polyurethane sealing gasket and 2, 3, 4 or 6 half-turn threaded screws, depending on the version (**). An M6 x 16 earth stud is welded in the cover to provide equipotential connection with the body.

• 28 sizes available increasing to 42 by using the extension box accessory
• 80mm and 120mm depths available, with or without pre-built FL 21 cable entries
• IP66 protection meaning the enclosures are dust tight and protect against powerful jets of water and heavy seas
• External mechanical impact resistance of up to IK10 (joules 20) meaning the wall box gives protection against a 5 kg object dropped from 40 cm in height
• Can be Installed with just a screwdriver
• Direct fixing though the rear or with external mounting lugs
• Protected inside and outside with polyester grey paint, RAL 7035
• Attractive and tough design for protection of sensitive electronics

The Spacial SDB range from Schneider are suitable for use in underground parking, road and railway tunnels.

(*) 3 profiles for width 800 mm, (**) 2 for Bus box (3 screws for width greater than 400 mm), 4 for Flat and Entry boxes (6 screws for width greater than 400 mm).

This self tapping screw from Schneider Electric is a versatile and reliable solution for various applications. With dimensions of M5 x 10mm, it is suitable for use with mounting plates and rails, made from durable metal material.

• Easy to install with M5 thread type and 10mm length
• Sustainable offer with no specific recycling operations required
• Lightweight at 0.286 kg

• Ideal for fixing accessories in the Spacial range
• Suitable for industrial and commercial use
• Can be used for securing mounting plates and rails

Yes, this self tapping screw is specifically designed for use with mounting plates.

Yes, this screw is fully compatible with the Spacial SBM range from Schneider Electric.

Yes, this screw is a Green Premium product with RoHS compliance, making it an eco-friendly choice.

Yes, this self tapping screw is versatile and suitable for a wide range of multi-purpose applications.

Yes, this screw is designed for easy installation with an M5 thread type and 10mm length.