SKF Nitrile Rubber (NBR) Radial Shaft Seal, 210 mm ID, 240 mm OD, 15 mm

This radial shaft seal provides a sealing solution for rotating shafts in industrial assemblies, designed to prevent fluid leakage and exclude contaminants during shaft rotation. It is manufactured from nitrile rubber and sized for applications requiring a 210 mm internal bore with a 240 mm external housing fit, offering a Compact cross-section suited to common metric shaft arrangements.

• Nitrile rubber construction delivers oil resistance and material resilience
• Rotary design supports continuous shaft rotation without leakage
• 15 mm cross-section ensures robust axial sealing contact
• Balanced lip geometry reduces friction during operation
• Withstands standard industrial loads while maintaining seal integrity

• Suitable for sealing gearbox output shafts in machinery
• Ideal for rotating equipment with oil containment requirements
• Used with pumps where shaft sealing and contamination exclusion are needed
• Can be used for motor drive shafts in factory installations
• Appropriate for maintenance replacement in metric shaft assemblies

The elastomer is nitrile rubber which provides resistance to petroleum-based oils and greases.

The 15 mm section thickness supplies axial contact area that tolerates minor shaft endplay while retaining sealing pressure.

The inner bore is 210 mm for a press fit onto the shaft and the outer diameter is 240 mm for seating into the housing bore.

The lip profile is configured to reduce friction at the rotating interface, slowing wear rates during continuous operation.