Infineon 24V BATT SWITCH DEMO MOSFET Driver for AUIR3242S for Battery Switch, Construction Agricultural Vehicles (CAV),
- RS Stock No.:
- 232-6793
- Mfr. Part No.:
- 24VBATTSWITCHDEMOTOBO1
- Brand:
- Infineon
Available for back order.
Price (ex. GST) Each
$549.66
(exc. GST)
$604.63
(inc. GST)
Units | Per unit |
---|---|
1 - 1 | $549.66 |
2 - 2 | $538.67 |
3 + | $527.91 |
- RS Stock No.:
- 232-6793
- Mfr. Part No.:
- 24VBATTSWITCHDEMOTOBO1
- Brand:
- Infineon
Technical data sheets
Legislation and Compliance
Product Details
24V BATT SWITCH DEMO
The 24 V ADR Switch Demonstrator shows a semiconductor based solution of a 24 V battery master switch for trucks as required by the ADR regulation (European Agreement Concerning the International Carriage of Dangerous Goods by Road).
The demonstrator consists of eight low ohmic MOSFETs connected in parallel and mounted on a structured copper IMS (insulated metal substrate) board together with a gate driver circuit to switch those MOSFETs on and off. In order to protect the MOSFETs against excessive overvoltage there are four transient voltage suppressor diodes implemented at the bottom side of the board.
The demonstrator consists of eight low ohmic MOSFETs connected in parallel and mounted on a structured copper IMS (insulated metal substrate) board together with a gate driver circuit to switch those MOSFETs on and off. In order to protect the MOSFETs against excessive overvoltage there are four transient voltage suppressor diodes implemented at the bottom side of the board.
Meeting market demands for master switches
Smaller is better here, as a small battery disconnect switch solution is easier to integrate, costs less and requires less development effort. Ideal dimensions measure just 100 mm x 50 mm. Battery switch customers also look for designs with various specifications, such as:
•Thickness: 1.3 mm
•Electrical resistance: 60 μOhm
•Thermal resistance (non-isolated version): 0.1 K/W
•Thermal resistance (isolated version): ∼ 0.2 K/W
•No. of copper-filled laser vias per MOSFET: 300
•RDS(on) from terminal to terminal: 110 μOhm
•Thickness: 1.3 mm
•Electrical resistance: 60 μOhm
•Thermal resistance (non-isolated version): 0.1 K/W
•Thermal resistance (isolated version): ∼ 0.2 K/W
•No. of copper-filled laser vias per MOSFET: 300
•RDS(on) from terminal to terminal: 110 μOhm
Potential Applications
•Unidirectional battery disconnection
•Safety applications such as EPS, engine fan, chassis control etc.
•Replacement of mechanical Relay
•High current control load
•Safety applications such as EPS, engine fan, chassis control etc.
•Replacement of mechanical Relay
•High current control load
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Power Management Function | MOSFET Driver |
For Use With | Battery Switch, Construction Agricultural Vehicles (CAV), Power Distribution, Relays |
Kit Classification | Demonstration Board |
Featured Device | AUIR3242S |
Kit Name | 24V BATT SWITCH DEMO |
Related links
- Infineon AUIR3242S BOARD B2B MOSFET Gate Driver for AUIR3242S for...
- Infineon AUIR3242 BOARD UNIDIR MOSFET Driver for AUIR3242S for...
- MikroElektronika BATT-MON CLICK Battery Charger for STC3115
- Infineon EVAL-2ED020I12-F2 IGBT Gate Driver for 2ED020I12-F2 for...
- Microchip 0.5W LED Driver Demo Board Boost Regulator for MCP1643
- Microchip MCP16301 High Voltage Buck Converter 600 mA Demo Board
- Infineon Motherboard MOSFET Gate Driver for KIT_LGMB_BOM503 for...
- Microchip Boost RGB LED Driver Demo Board Boost Controller for...