Siemens JB 510 Series Output Module, Bistable Relay Contact, 24 V dc
- RS Stock No.:
- 287-8627
- Mfr. Part No.:
- JB 510C23 / 5WG1510-4CB23
- Brand:
- Siemens
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 287-8627
- Mfr. Part No.:
- JB 510C23 / 5WG1510-4CB23
- Brand:
- Siemens
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Siemens | |
| Select all | ||
|---|---|---|
Brand Siemens | ||
- COO (Country of Origin):
- RO
The Siemens binary output is a KNX device with two switching outputs. The device is installed in a 4 x 4 inch junction box. The bus is connected via a bus terminal block. The actuator electronics are supplied via the bus voltage. The binary output can switch resistive loads, inductive loads, or capacitive loads.
Each output of the actuator may be set to one of the following operating modes, normal operation and timer operation
Related links
- Siemens JB Dimming Controller Switch Actuator, 24 V dc
- Siemens RS 510 Series Output Module for Use with Ap 118 Control Module Box Or Ap 641 Room Control Box 230 V ac
- Siemens JB Series Adapter DC 24V
- Siemens UP 510 Series Output Module for Use with BTI Interface 24 V dc
- Siemens JB Series Adapter 24 V dc
- Siemens N 530 Series Adapter 24 V dc
- Siemens RS 510 Series Adapter for Use with Ap 118 Control Module Box Or Ap 641 Room Control Box, Potential-free
- Siemens N 532 Series Adapter 230 V ac