Microchip ATTINY13A-SSH, 8bit AVR Microcontroller, ATtiny13, 20MHz, 1 kB Flash, 8-Pin SOIC

Atmel's tinyAVR® devices are optimized for applications that require performance, power efficiency, and ease-of-use in a small package. All picoPower devices are designed from the ground up for lowest possible power consumption.

Small, most compact package for applications where size is critical
Capacitive Touch
Fast and code efficient
High integration
1.8V to 5.5V operation (0.7V operation for ATtiny43U)

The Microchip technology AVR family type, JEDEC SOIC package, surface mount, 8-pin picoPower tiny 8-bit microcontroller has a maximum voltage rating of 5.5V. This microcontroller operates at a maximum speed of 20MHz and features 1kb ISP flash program memory and 64bytes of internal SRAM. By executing powerful instructions in a single clock cycle, it achieves throughputs approaching 1MIPS per MHz allowing the system to optimize power consumption versus processing speed.

• Brown-out Detector (BOD)
• Capacitive Touch
• Embedded voltage regulator for a single supply operation
• External and Internal Interrupt Sources
• Fast and code efficient
• High endurance non-volatile memory segments
• High integration
• Low Power AVR
• Low power Idle, ADC noise reduction, and Power-down modes
• Memory Protection Unit (MPU)
• On-chip analogue comparator
• Operating temperature ranges between -40°C and 85°C
• Power-on-Reset (POR)
• Programmable watchdog timer with Separate on-chip oscillator
• Sleep and backup modes
• Temperature sensor
• Ultra-Low-power RTC
• Watchdog for safe operation

• Consumer appliances
• Home automation
• Industrial

For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.