SKF Closed Linear Plain Bearing, LPBR 30

  • RS Stock No. 308-0920
  • Mfr. Part No. LPBR 30
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): AT
Product Details

LPBR Plain Bushings - Closed

Share the same dimensions as LBBR ball bushings
Polyacetal with specific polyethylene bearing surfaces
Low-maintenance.
Good emergency running properties and low “stick”
Resistant to heavy static stress and insensitive to shocks
Initial lubrication necessary, even if dry running is required later

Stock No. Dimensions C4 (mm)
308-0879 10
308-0885 12
308-0908 13
308-0914 17
308-0920 20
//media.rs-online.com/t_line/LD308087-01.gif

SKF Plain Bushings

Specifications
Attribute Value
Linear Plain Bearing Type Plain
Configuration Closed
Inside Diameter 30mm
Outside Diameter 40mm
Length 50mm
Dynamic Load Rating 17000N
Static Load Rating 4800N
6 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 45.15
(exc. GST)
$ 49.67
(inc. GST)
units
Per unit
1 - 5
$45.15
6 - 11
$42.55
12 +
$40.70
Related Products
Closed ball bushings and plain bearings for XY ...
Description:
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that ...
Standard Design,In some applications it may be necessary ...
Description:
Standard Design,In some applications it may be necessary to replace the bearing liner only. Replacement liners are simply pushed into the aluminium housings.
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Standard Design,In some applications it may be necessary ...
Description:
Standard Design,In some applications it may be necessary to replace the bearing liner only. Replacement liners are simply pushed into the aluminium housings.