Linear Motion

We offer a great range of linear slides, linear guides & positioning tables for any power transmission requirement. We work closely with industry-leading brands like igus, Bosch Rexroth, THK, IKO Nippon Thmpson and NSK so you have an expert selection of cylinder guides, slide assemblies, guide wheels and slewing rings. You can also choose from a full range of accessories including socket tools, T-Nuts and combination plates.

What is power transmission?

Power transmission, or specifically mechanical power transmission in this case, are the components used in an industrial system with moving parts, as opposed to those that are powered by electricity.

What types of mechanical power transmission options are available?

The following types are available:

  • Cylinder Guides: pneumatic devices for generating motion in various ways
  • Linear Guides
  • Assemblies: a load bearing mechanism that also guides the load in a straight line
  • Guide blocks: the carriage that slides along the assembly
  • Rails: the beam along which carriage slides along
  • Linear Slides
  • Assemblies: for precise linear rolling motion along guideways
  • Cap wipers: these lubricate contact surfaces, remove debris and improve operational safety
  • Carriage plates: a flush surface for mounting your components and for attaching t-nuts with grooves for drifting
  • Flange clamps: these enable slides to become self-supporting beams
  • Guide wheels: ball bearing based wheels allowing precision linear motion
  • Slewing rings: these are slow turning rotating rings containing bearings
  • Rails: allow for powered or manual mechanism motion in a linear direction
  • T-Nuts: these secure fixings for your components
  • Track Rollers: these are concentric and eccentric adjusting roller wheels for a spacer slide
  • Adapter Bushings: are used for mounting guide wheels, in concentric and eccentric varieties
  • Positioning Cables
  • Clamping strips: used for attaching existing and additional equipment
  • Combination plates: are securing attachments which can be drilled
  • Angles: for 45° and 90° angular component clamping
Flat Cage Assemblies
Flat Cage Assemblies
Guide Wheels
Guide Wheels
Linear Bearing Units
Linear Bearing Units
Linear Bearings
Linear Bearings
Linear Guide Blocks
Linear Guide Blocks
Linear Guide Rails
Linear Guide Rails
Linear Guides
Linear Guides
Linear Shaft Supports
Linear Shaft Supports
Linear Shafts
Linear Shafts
Linear Slide Accessories
Linear Slide Accessories
Linear Slide Rails
Linear Slide Rails
Linear Slides
Linear Slides
Positioning Tables
Positioning Tables
Slewing Rings
Slewing Rings

2119 Products showing for Linear Motion

Sort By
1 of 106
In Stock
RS PRO HG Series, Linear Guide Rail 15 mm width 350 mm Length
  • RS Stock No. 176-6686
Subtotal (1 unit)
$167.84(exc. GST)
$167.84/unit
In Stock
Igus 600 mm Long Aluminium Round Shaft, 12 mm Shaft Diam., Hardness 75 HB, h8 Tolerance
  • RS Stock No. 747-2604
  • Mfr. Part No. AWMP-12-600
Subtotal (1 unit)
$86.73(exc. GST)
$86.73/unit
In Stock
Accuride, DZ0115-0055RS Mild Steel Linear Slides, 480 mm Stroke Length
  • RS Stock No. 699-8509
  • Mfr. Part No. DZ0115-0055RS
Subtotal (1 unit)
$27.57(exc. GST)
$27.57/unit
In Stock
Ewellix Makers in Motion LBBR 20-2LS Bearing with 20 mm ID 28 mm OD 1160 N 800 N
  • RS Stock No. 284-9122
  • Mfr. Part No. LBBR 20-2LS
Subtotal (1 unit)
$68.45(exc. GST)
$68.45/unit
In Stock
Igus N Series, NS-01-17-600, Linear Guide Rail 17 mm width 600 mm Length
  • RS Stock No. 448-5449
  • Mfr. Part No. NS-01-17-600
Subtotal (1 unit)
$46.84(exc. GST)
$46.84/unit
Temporarily out of stock
Bosch Rexroth 800 mm Long Steel Closed Bush Shaft, 16 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS Stock No. 724-3403
  • Mfr. Part No. R100001600,800mm
Subtotal (1 unit)
$52.25(exc. GST)
$52.25/unit
In Stock
Ewellix Makers in Motion Linear Shaft Support 2-Bolt Base Bearing Housing 33 mm, LSHS12 40mm 18 mm
  • RS Stock No. 284-9504
  • Mfr. Part No. LSHS12
Subtotal (1 unit)
$114.34(exc. GST)
$114.34/unit
In Stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 35 mm, GW12 12 mm 42 mm
  • RS Stock No. 194-6931
  • Mfr. Part No. GW12
Subtotal (1 unit)
$71.87(exc. GST)
$71.87/unit
Temporarily out of stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 58 mm, GW25 25 mm 74 mm
  • RS Stock No. 172-1198
  • Mfr. Part No. GW25
Subtotal (1 unit)
$83.19(exc. GST)
$83.19/unit
In Stock
Igus Bearing Unit OJUM-06-20 DryLin® R Series
  • RS Stock No. 617-4769
  • Mfr. Part No. OJUM-06-20
Subtotal (1 unit)
$139.28(exc. GST)
$139.28/unit
Temporarily out of stock
IKO Nippon Thompson LWL20R660BHS2 Linear Slide Rail 660 mm Length, 660mm Width
  • RS Stock No. 199-9791
  • Mfr. Part No. LWL20R660BHS2
Subtotal (1 unit)
$729.36(exc. GST)
$729.36/unit
In Stock
INA Linear Shaft Support 2-Bolt Base Linear Ball Bearing Block 42 mm, GW16 16 mm 50 mm
  • RS Stock No. 172-1196
  • Mfr. Part No. GW16
Subtotal (1 unit)
$63.76(exc. GST)
$63.76/unit
Temporarily out of stock
Rose+Krieger Positioning Table FNA5023TA0170, 125 N
  • RS Stock No. 373-7705
  • Mfr. Part No. FNA5023TA0170
Subtotal (1 unit)
$516.14(exc. GST)
$516.14/unit
In Stock
IKO Nippon Thompson, BWU2545 Stainless Steel Linear Slides, 28 mm Stroke Length
  • RS Stock No. 238-3436
  • Mfr. Part No. BWU2545
Subtotal (1 unit)
$385.20(exc. GST)
$385.20/unit
In Stock
Bosch Rexroth 600 mm Long Steel Closed Bush Shaft, 14 mm Shaft Diam., Hardness 60 HRC, h6 Tolerance
  • RS Stock No. 724-3409
  • Mfr. Part No. R100001400,600mm
Subtotal (1 unit)
$61.02(exc. GST)
$61.02/unit
In Stock
Ewellix Makers in Motion 400 mm Long Steel Closed Bush Shaft, 8 mm Shaft Diam., Hardness 64 HRC, h6 Tolerance
  • RS Stock No. 341-1532
  • Mfr. Part No. LJM8X400ESSC2
Subtotal (1 unit)
$54.82(exc. GST)
$54.82/unit
In Stock
IKO Nippon Thompson, BSP1035SL Stainless Steel Linear Slides, 26 mm Stroke Length
  • RS Stock No. 749-301
  • Mfr. Part No. BSP1035SL
Subtotal (1 unit)
$86.89(exc. GST)
$86.89/unit
In Stock
IKO Nippon Thompson Linear Guide LWL3C1R150T0H, LWL
  • RS Stock No. 917-5945
  • Mfr. Part No. LWL3C1R150T0H
Subtotal (1 unit)
$330.52(exc. GST)
$330.52/unit
Temporarily out of stock
THK, ER513+40L Linear Slides, 22 mm Stroke Length
  • RS Stock No. 742-4021
  • Mfr. Part No. ER513+40L
Subtotal (1 unit)
$195.66(exc. GST)
$195.66/unit
In Stock
Igus Positioning Table SHT-12-AWM-250, 2.8 kN
  • RS Stock No. 488-6016
  • Mfr. Part No. SHT-12-AWM-250
Subtotal (1 unit)
$820.57(exc. GST)
$820.57/unit
1
2
3
106
Results per page

Related links