ADAFRUIT INDUSTRIES DotStar Series, RGB LED Strip 5V dc, 2329

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit DotStar Digital LED Strips

DotStar LEDs are 5050-sized LEDs on a flexible strip with an embedded microcontroller inside the LED. The strips are made of flexible PCB material and are supplied with a weatherproof sheathing. They can be cut to any size using the cut lines after every LED or connected together to make longer strips. A 5V DC power supply must be used as any higher than 6V can destroy the entire strip.

To control the LEDs, use a generic 2-wire SPI. The colour/brightness of each LED is set using 24-bit colour (8 bits each for red, green and blue). Each LED acts like a shift register, reading incoming colour data on the input pins then shifting out the previous colour data on the output pin. By sending a long string of data, you can therefore control many LEDs.

The PWM is built into each LED-chip and they have high refresh rates. In Persistence-of-Vision (POV) applications, you have less flickering, particularly at low brightness levels. DotStars have a 20 kHz PWM rate, so even when moving the strip around, you cannot see the pixelation and the colour blending is smooth.

Each strip comes with a 4-pin JST SM connector at one end. These LEDs have 2 wires (input and output) for sending data - one clock pin and one data pin. The clock and data is separated so you can use any processor speed or type to control these strips. Hardware SPI support is handy but not required. Use DotStars with any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller and SparkCore.

Currently, there are two versions available from RS:

Adafruit 2328 - 0.5 m Black LED Strip with 72 RGB LEDs (RS 124-5482)
Adafruit 2329 - 0.5 m White LED Strip with 72 RGB LEDs (RS 124-5483)

Adafruit LEDs, Drivers and Shields

Specifications
Attribute Value
LED Colours Blue, Green, Red
Strip Length 500mm
Voltage Rating 5V dc
Number of LEDs per Metre 144
Flexible/Rigid Flexible
LED Pitch 7mm
Series DotStar
4 : Next working day (AU stock)
24 : 5 working days (Global stock)
Price (ex. GST) Each
$ 43.60
(exc. GST)
$ 47.96
(inc. GST)
units
Per unit
1 +
$43.60
Related Products
4W 700mA Constant Current LED Driver. Universal input ...
Description:
4W 700mA Constant Current LED Driver. Universal input voltage 90 V to 264 V ac LED Power SupplyHigh EfficiencyFully Protected for Short Circuit, Open Circuit, Over Load, Over Voltage and Over TemperatureLow Standby Power, ErP conformCompact Size, Low ProfileIP65 rated ...
The digital RGBD flexible LED strips from PowerLed ...
Description:
The digital RGBD flexible LED strips from PowerLed are available in both IP20 and IP65 options. They feature an exciting colour chasing function that enables you to choose from 99 different effects. Their wide range of colours and lighting effects ...
Constant current design to ensure even colour distribution ...
Description:
Constant current design to ensure even colour distribution over longer lengthsIntelligent temperature control to prolong life of stripHigh temperature limitation to ensure safetyAvailable in 20M lengths60 LEDs per mtrMultiple applications for commercial and residential environments.
High Brightness Long Life Low Power Consumption RoHS ...
Description:
High Brightness Long Life Low Power Consumption RoHS Compliant No UV Emission Thermally Optimized Low Profile Moisture Resistant Mounting Holes for ease of installation.