Lathe Tool Holders & Inserts
Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.
What are the advantages of lathe tool holders?
Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.
Why use lathe tool holders?
There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.
- They can change the angle of the tool bit.
- They can change the level of overhang in the tool bit.
- They can direct fluid to the work area.
- They may deflect the tool bit away from the piece when an excessive load is added.
71 Products showing for Lathe Tool Holders & Inserts
Sort By
In Stock
Subtotal (1 box of 10 units) $230.07(exc. GST) $230.07/box |
In Stock
Subtotal (1 box of 10 units) $313.29(exc. GST) $313.29/box |
Stocked by manufacturer
Subtotal (1 pack of 5 units) $271.57(exc. GST) $54.314/unit |
In Stock
Subtotal (1 pack of 5 units) $324.93(exc. GST) $64.986/unit |
In Stock
Subtotal (1 box of 10 units) $409.16(exc. GST) $409.16/box |
In Stock
Subtotal (1 box of 10 units) $226.73(exc. GST) $226.73/box |
In Stock
Subtotal (1 unit) $349.11(exc. GST) $349.11/unit |
In Stock
Subtotal (1 box of 10 units) $325.66(exc. GST) $325.66/box |
In Stock
Subtotal (1 box of 10 units) $347.61(exc. GST) $347.61/box |
In Stock
Subtotal (1 box of 10 units) $331.25(exc. GST) $331.25/box |
Temporarily out of stock
Subtotal (1 box of 10 units) $272.92(exc. GST) $272.92/box |
In Stock Pramet Positive Turning Insert for Use with SCLCR 06, 9.525 mm Height, 80 ° Approach, 9.525mm Length
Subtotal (1 box of 10 units) $424.50(exc. GST) $424.50/box |
In Stock
Subtotal (1 box of 10 units) $246.82(exc. GST) $246.82/box |
Temporarily out of stock
Subtotal (1 unit) $463.57(exc. GST) $463.57/unit |
In Stock
Subtotal (1 box of 10 units) $356.76(exc. GST) $356.76/box |
In Stock
Subtotal (1 unit) $348.24(exc. GST) $348.24/unit |
In Stock
Subtotal (1 box of 10 units) $250.28(exc. GST) $250.28/box |
In Stock
Subtotal (1 pack of 10 units) $334.19(exc. GST) $33.419/unit |
In Stock
Subtotal (1 box of 10 units) $293.50(exc. GST) $293.50/box |
In Stock
Subtotal (1 box of 10 units) $298.42(exc. GST) $298.42/box |
Related links
- Pramet Lathe Insert Removal Key for Use with Grooving Insert
- Pramet Positive Turning Insert for Use with T6310, 20 ° Approach
- Lathe Tools & Kits
- Pramet Lathe Tool Holder for Use with CC Inserts 95 ° Approach, 100 mm Length
- Pramet Lathe Tool Holder for Use with LFMX 2.2 110 mm Length
- Pramet Lathe Tool Holder for Use with TN/TNM Inserts 93 ° Approach, 125 mm Length
- Pramet Lathe Tool Holder for Use with TPMR 1103 91 ° Approach, 20 mm Length
- Pramet Lathe Tool Holder for Use with DCMT 11T3 93 ° Approach, 100 mm Length