- RS Stock No.:
- 769-1704
- Mfr. Part No.:
- 84TZSA.4
- Brand:
- Facom
11 In AU stock for next working day delivery
69 In Global stock for delivery within 10 working day(s)
Added
Price (ex. GST) Each
$19.49
(exc. GST)
$21.44
(inc. GST)
Units | Per unit |
1 + | $19.49 |
- RS Stock No.:
- 769-1704
- Mfr. Part No.:
- 84TZSA.4
- Brand:
- Facom
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- FR
Product Details
Metric hexagon key with spherical head
Our hex key from Facom is made for high and low torque applications. The tool also has an ergonomic T handle and keys on both ends. These hexagon keys are used for the removal and tightening of fasteners and sockets.
This range includes the following sizes (metric):
769-1704 – 4mm
755-4131 – 5mm
769-1748 – 6mm
This range includes the following sizes (metric):
769-1704 – 4mm
755-4131 – 5mm
769-1748 – 6mm
Features and Benefits:
Metric hexagon key with spherical head
Ergonomic tee-handle allows effective use of either end of key
Sperical head gives a working angle of up to 30°
Short shank prvides extra torque for tightening
Polished phosphate finish
Silicon steel
Ergonomic tee-handle allows effective use of either end of key
Sperical head gives a working angle of up to 30°
Short shank prvides extra torque for tightening
Polished phosphate finish
Silicon steel
Typical Applications
Hex keys and bit sets are used by:
Plumbers
Electricians
Mechanics
Electronic Engineers
Plumbers
Electricians
Mechanics
Electronic Engineers
Did you know?
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or a similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
A Hex Key is commonly referred to as an Allen Key, this is because Allen was the original manufacturer of the Hex key.
Also, a hex key can be reconditioned using an electrical grinder, or a similar type of equipment. Through removing the worn out part, the hex key has the capability of functioning like its brand new again – Although this type of maintenance should be minimal if the hex key is cared for and kept in a good condition.
Note
84TZ range have a straight standard end
84TZS range have a spherical end
84TZS range have a spherical end
Specifications
Attribute | Value |
---|---|
Product Type | Hex Key |
Imperial or Metric | Metric |
Number of Pieces | 1 |
Hex Key Size | 4mm |
Shape | T |
Tip Type | Ball End Hexagon; Hexagon |
Short or Long Arm | Long |
Material | Silicon Steel |