Bulgin 10A Inline Fuse Holder for 6.3 x 32mm Fuse, 250V ac

From Bulgin, the FX0 series of In-line fuse holders designed for housing 5x20 mm, 6.3x25 and 6.3x32 mm cartridge fuses. The fully enclosed holders are robust and reliable, and with their two-part construction are simple to install. In-line fuse holders make it easier to access or change fuses in an electrical circuit as and when required.

Manufactured from high-quality materials the FX0 fuse holders feature brass nickel plated screw terminals requiring no specialized tooling. This makes termination easy and repair rapid. Available in two types, standard enclosed or sealed to IP66. FX0 fuse holders are ideal for industrial applications where a higher level of protection is needed. Suitable for maintenance, repair or for new designs.

The Bulgin FX0 series of in-line fuse holders have a PC1 rating. This means the fuse holders offer no integral protection against electric shock. Designers and manufacturers MUST provide additional protection against electric shock on equipment.

• Robust and reliable
• Compact design
• Fully enclosed clear Polybutene UL94HB or black Nylon 6 UL94V-0 plastic casings
• Convenient two-part construction, screws together
• IP66 versions to Protection Class to EN60529: 1992+A2:2013
• PVC Grommet and Nitrile O Ring on the Sealed IP66 Versions
• 10 Amp maximum
• 50 Volt (250 Volt inaccessible)
• Accepts 1mm² cable size maximum

Cartridge fuses and in-line fuse holders are used to protect a circuits cabling from the excessive current that could lead to damage or even an electrical fire. In-line fuse holders are used in a wide range of electrical and electronic applications. Some of the most common are

• Electrical appliances and devices
• Portable electronics
• LCD Monitors
• DVD players
• Game systems
• Laptops
• Printers
• Battery packs

• Part numbers FX0380, FX0280 and FX0180 standard fuse holders.
• Part numbers FX0385, FX0285 and FX0185 are sealed to IP66. These fuse holders are supplied with a 3 stage stepped cable grommet. The stepped grommet allows the fuse holder to maintain its IP66 rating depending on the wire size needed.

This inline fuse holder is designed to protect electrical circuits in sophisticated electronic equipment. It is specifically made for 6.3x32mm fuses, ensuring safe operation and a straightforward installation process. Its versatility makes it suitable for various industrial applications, particularly in automation and electronics.

• Made from durable nylon for enhanced wear resistance
• Utilises brass contacts for improved electrical conductivity
• Complies with PC1 protection category standards

• Utilised with 6.3x32mm fuses in automation systems
• Suitable for electronic devices that require circuit protection
• Applicable for machinery and equipment within mechanical industries

The holder is compatible with 6.3x32mm fuses, designed for optimal performance.

To install, securely insert the fuse into the holder, ensuring a tight fit for maintaining electrical continuity and safety.

The holder is rated for a maximum of 250V AC, making it suitable for standard applications but not for voltages exceeding this specification.

Regular inspection for wear and ensuring secure connections are recommended to maintain safety and performance over time.