Sensata/Cynergy 3 RSF66 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, Direct Load, 240V ac Max,

A float switch capable of offering a variety of switching options and adjusting to system requirements. Compatible with a wide choice of chemicals and liquids due to the fact they are manufactured from high grade polyphenylene sulphide.

Suitable for Controlling, Filling or Emptying of Tanks via Electromechanical Relays
Provides Make/Make or Break/Break Switch Action With a Choice of 50 or 100mm Separation Between Upper and Lower Switching Points
All Units WRAS Approved

The Cable entry point must NOT under any circumstances be submerged:
– On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
– On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.

Use this dual float switch from Sensata Cynergy3 to control the filling or emptying of tanks with electromechanical relays. Its polyphenylene sulphide (PPS) body and nitrile gasket make it resistant to abrasion and sunlight, so it's suitable for use in tough industrial environments. These materials can also withstand exposure to harsh chemicals, including acids, alkalis and bleaches. The switch mounts vertically on the top of a fluid tank or reservoir, so installation is straightforward. It's suitable for high-level and low-level switching in a wide range of applications, including food and drink processing.

• Broad operating temperature range of -10°C to +85°C for use in demanding conditions
• 1 m cable sheathed in PVC (polyvinyl chloride) for durability and flexibility during installation
• Total length of 134 mm for use in applications where space is limited

The cable entry point should not be submerged in water. To ensure safe use, install the switch so that the mounting thread and cable entry are above the maximum liquid level.