JST, YRS Plier Crimping Tool for SSH

  • RS Stock No. 752-2245
  • Mfr. Part No. YRS-859
  • Manufacturer JST
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): JP
Product Details

JST YRS-859 Strip Feed Hand Crimping Tool for SSH and SSHL Crimp Terminals

Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

JST YRS-859 Strip Feed Hand Crimping Tool – Overview

From JST a durable, reliable and easy to use hand operated strip feed crimping tool designed to crimp side feeding open barrel strip terminals onto wire. The strip terminals can be cut to the length desired or simply crimped straight off the reel. This hand tool consists of two handles, a ratchet mechanism, feeding plate, guide and alignment features and precision ground dies. The upper die can be inverted offering two crimping positions for 30 AWG and 28 AWG

Ratchet Mechanism

The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles will re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

Terminal Guide and Guide Plate

This hand crimping tool features a strip carrier, terminal guide and guide plate which secure and align the terminals in preparation for crimping

Key Features and Benefits

• Durable and easy to use
• Precision ground dies
• Ratchet mechanism ensures full crimp cycle is achieved
• Guides and carriers for accurate positioning of strip terminals

Questions and Answers

What Terminals can this Crimping Tool be used with?
This hand crimping tool is designed for crimping JST SSH-003T-P0.2-H, SSH-003GA-P0.2, SSHL-003T-P0.2 and SSHL-003GA1-P0.2 open barrel strip terminals that accept a 30 AWG to 28 AWG wire size range onto wire

JST Hand Crimping Tools

Specifications
Attribute Value
Series YRS
Crimp Connector Type SSH
Crimp Tool Type Plier
10 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 1,869.99
(exc. GST)
$ 2,056.99
(inc. GST)
units
Per unit
1 +
$1,869.99
Related Products
Sabre Contacts & Tooling Four points of electrical ...
Description:
Sabre Contacts & Tooling Four points of electrical contact for greater contact reliability14-18 awg Hand Crimp Tool for Sabre Flat Blade Crimp Terminals Activation/Deactivation Tool to be used with 43178 Wire to Wire Terminal Series Extraction Tool used to extract ...
JST YC-610R Hand Crimping Tool for SPA, SPAL ...
Description:
JST YC-610R Hand Crimping Tool for SPA, SPAL and SPHD Crimp Terminals Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time One is the electrical connection between ...
JST WC-692 Hand Crimping Tool for SXA and ...
Description:
JST WC-692 Hand Crimping Tool for SXA and SXAM Crimp Terminals Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time One is the electrical connection between conductor ...
Hirose DF3 Hand Crimping Tools A range of ...
Description:
Hirose DF3 Hand Crimping Tools A range of terminal crimping hand tools suitable for use with DF33 series connector contacts Hand crimp tool - DF3-TA2428HC (stock number 700-9795) is suitable for crimping DF3-2428SC/SCC (stock number 700-9821 and 779-4800) contacts Hand ...