HellermannTyton WIC1 Snap-On Cable Marker, White, Pre-printed "3", 2.8 mm Cable Orange, 2 mm Cable, 561-01633

This cable marker is a snap-on, pre-printed identification sleeve designed for quick labelling of wires and small cable bundles in industrial electrical and automation environments. It is manufactured from PA66 polyamide and supplied in Orange with a white legend showing the numeral 3, intended for secure identification where termination is complete or during maintenance tasks.

• UL94 V-0 flammability rating for enhanced fire safety
• Vibration‑resistant locking prevents marker rotation on conductors
• Operating range from -40°C to +85°C for harsh environments
• Hot‑foil printed white legend for clear, long‑lasting text
• Clip‑on fixation secures onto 2.0–2.8 mm conductors for a tight fit

• Suitable for labelling control and signal wiring in automation panels
• Ideal for phase and circuit identification in electrical installations
• Used with maintenance routines for Rapid cable re‑identification
• Can be used for marking small‑diameter Multicore harnesses

It clips reliably onto conductors with outside diameters from 0.078 inch to 0.110 inch, corresponding to bundle sizes between 2.0 mm and 2.8 mm.

The marking is applied by hot‑foil printing, producing a high‑contrast white legend that resists abrasion and handling during installation.

Two accessories are available to accommodate larger cross‑sections up to 95 mm², enabling use on substantially bigger conductors.

It conforms to EN 60062 and IEC 304 for standardised identification formats and materials suitable for electronic and electrical use.