INA Bearing Insert 30 mm ID 55 mm OD RALE30-XL-NPP-FA106
- RS Stock No.:
- 137-1534
- Mfr. Part No.:
- RALE30-XL-NPP-FA106
- Brand:
- INA
Bulk discount available
Subtotal (1 unit)*
$77.48
(exc. GST)
$85.23
(inc. GST)
FREE delivery for orders over $60.00 ex GST
Temporarily out of stock
- Shipping from 19 March 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 12 | $77.48 |
| 13 - 24 | $75.28 |
| 25 + | $73.29 |
*price indicative
- RS Stock No.:
- 137-1534
- Mfr. Part No.:
- RALE30-XL-NPP-FA106
- Brand:
- INA
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | INA | |
| Inside Diameter | 30 mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 55 mm | |
| Static Load Rating | 8.3kN | |
| Dynamic Load Rating | 14.1kN | |
| End Type | Sealed | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Select all | ||
|---|---|---|
Brand INA | ||
Inside Diameter 30 mm | ||
Product Type Bearing Insert | ||
Outside Diameter 55 mm | ||
Static Load Rating 8.3kN | ||
Dynamic Load Rating 14.1kN | ||
End Type Sealed | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Radial Insert Ball Bearings with Eccentric Locking Collar
INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.;In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)
Suffixes
FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)
INA
Related links
- INA Bearing Insert 30 mm ID 62 mm OD RAE30-XL-NPP-FA106
- INA Bearing Insert 25 mm ID 52 mm OD RAE25-XL-NPP-FA106
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-FA106
- INA Bearing Insert 20 mm ID 42 mm OD RALE20-XL-NPP-FA106
- INA Bearing Insert 50 mm ID 90 mm OD RAE50-XL-NPP-FA106
- INA Bearing Unit Insert 20 mm ID 47 mm OD RAE20-XL-NPP-FA106
- INA Bearing Unit Insert 15 mm ID 40 mm OD RAE15-XL-NPP-FA106
- INA Bearing Unit Insert 35 mm ID 72 mm OD RAE35-XL-NPP-FA106