Toggle Switches

Toggle switches are among the most basic and most common of all electronic components, the switch moves contacts that either provide a path for current to flow through or moves those contacts in such a way that the path is cut. The toggle switches most people will be familiar with are light switches.

How Does a Toggle Switch Function?
Toggle switches may vary a bit in function from one to the next depending upon their configurations. However, the basics are the same.
When the actuator (the toggle itself) is moved, the armature in the switch moves the contact into position either energizing the circuit or de-energizing it. Once the switch is moved from one position to the other, it typically stays that way. There are also momentary switches, which energize or de-energize a circuit for as long as they are actuated and then go back to their normal state once the actuator is released. This is accomplished via a spring mechanism that exerts a force on the armature from the inside.

Contact Configuration of a Toggle Switch
  • A single pole single throw (SPST) switch is the simplest and most common type of toggle switch. These switches allow simple on and off operation for a single circuit. Most light switches are SPST switches.
  • Single pole double throw (SPDT) switches can be used to change where a voltage is directed. The double throw means that the switch can be used to energize two different circuits - one at a time - from a single source of energy.
  • Double pole single throw (DPST) switches allow an operation that is very similar to having two SPST switches hooked together in one device. The switch can turn two circuits on and off. These are very convenient when more than one device needs to be controlled with the same switch.
  • Double pole double throw (DPDT) switches allow two different circuits to be served by the same pole. These are used in applications where a circuit may need to have changing voltages applied to connected devices.

There are also switches with the designation CO, such as SPCO (single pole changeover) switches. These have an off position in the middle of the switch and can be used to energize or de-energize two different circuits attached to the device.

...
Read more Read less

Filters

Viewing 1 - 20 of 1467 products
Results per page
Description Price Contact Configuration Switch Operation Contact Current Rating Mounting Type Terminal Type IP Rating Illuminated Panel Cut Out Width Panel Cut Out Height Panel Cut Out Diameter Actuator Length Actuator Material Voltage Rating Contact Resistance
RS Stock No. 448-0747
BrandRS PRO
$3.882
Each (In a Pack of 5)
units
Single Pole Double Throw (SPDT) Latching 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 401-703
BrandRS PRO
$3.46
Each
units
SPDT Latching 5 A @ 250 V ac PCB Through Hole - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 394-431
BrandRS PRO
$28.76
Each
units
Double Pole Double Throw (DPDT) Latching 5 A @ 28 V dc Panel Mount Solder - - - - 11.91mm 17.56mm Chromium Plated Brass - 10mΩ
RS Stock No. 401-692
BrandRS PRO
$3.93
Each
units
DPDT On-Off-On 5 A @ 28 V dc PCB Through Hole - - - - - 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 448-0769
BrandRS PRO
$7.268
Each (In a Pack of 5)
units
Double Pole Double Throw (DPDT) Latching 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Brass - 10mΩ
RS Stock No. 419-845
BrandRS PRO
$3.25
Each
units
SPST Latching 16 A @ 125 V ac Panel Mount Tab - Yes - - 20.2mm 16mm PC - 50mΩ
RS Stock No. 401-680
BrandRS PRO
$3.93
Each
units
DPDT Latching 5 A @ 250 V ac PCB Through Hole - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 394-475
BrandRS PRO
$7.27
Each
units
DPDT Latching 5 A @ 250 V ac Panel Mount Solder - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 394-459
BrandRS PRO
$6.05
Each
units
SPDT Latching 5 A @ 250 V ac Panel Mount Solder - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 448-0753
BrandRS PRO
$4.534
Each (In a Pack of 5)
units
Single Pole Double Throw (SPDT) On-Off-On 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Brass - 10mΩ
RS Stock No. 820-0514
BrandRS PRO
$20.85
Each
units
Double Pole Double Throw (DPDT) (On)-Off-On 5 A @ 250 V ac PCB Solder Lug IP67 - - - - 18mm Brass - 10mΩ
RS Stock No. 820-0504
BrandRS PRO
$15.72
Each
units
Double Pole Double Throw (DPDT) Latching 5 A @ 250 V ac PCB Solder Lug IP67 - - - - 18mm Brass - 10mΩ
RS Stock No. 734-7233
BrandRS PRO
$1.89
Each
units
Single Pole Double Throw (SPDT) On-Off-On 3 A @ 120 V ac Panel Mount Solder - - - - 4.95mm 5.33mm Chromium Plated Brass - 20mΩ
RS Stock No. 448-0775
BrandRS PRO
$4.408
Each (In a Pack of 5)
units
Double Pole Double Throw (DPDT) On-Off-On 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 820-0517
BrandRS PRO
$15.17
Each
units
Double Pole Double Throw (DPDT) On-Off-On 5 A @ 250 V ac PCB Solder Lug IP67 - - - - 18mm Brass - 10mΩ
RS Stock No. 734-7034
BrandRS PRO
$3.07
Each
units
Double Pole Double Throw (DPDT) (On)-On 5 A @ 250 V ac PCB Through Hole - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 394-419
BrandRS PRO
$11.81
Each
units
DPDT Latching 5 A @ 250 V ac Panel Mount Solder - - - - - 12.3mm Brass - 10mΩ
RS Stock No. 734-7255
BrandRS PRO
$1.58
Each
units
Single Pole Double Throw (SPDT) On-Off-On 400 mA @ 20 V PCB Through Hole IP67 - - - - 3.8mm Glass Filled Nylon - 100mΩ
RS Stock No. 419-855
BrandRS PRO
$3.93
Each
units
Single Pole Single Throw (SPST) Latching 16 A @ 125 V ac Panel Mount Tab - Yes - - 20.2mm 16mm PC 250V 50mΩ
RS Stock No. 734-6984
BrandRS PRO
$1.83
Each
units
Single Pole Double Throw (SPDT) On-Off-On 400 mA @ 20 V PCB Through Hole IP67 - - - - 7.62mm Chromium Plated Brass - 10mΩ
Related Products
Epoxy sealed terminals prevent contamination during soldering Chrome ...
Description:
Epoxy sealed terminals prevent contamination during soldering Chrome Plated Brass actuator Diallyl Phthalate (DAP) case (UL94V-0)Silver contacts
Panel-mount, miniature, single & double pole changeover toggle ...
Description:
Panel-mount, miniature, single & double pole changeover toggle switches with internal and external sealing washers Bush thread 1//4-40UNS (6·35-40UNS)Solder tags Silver contacts Max panel thickness; 1mm Brass actuator and Diallyl Phthalate (UL 94 V-0) case.
Switches suitable for PCB mounting with pins arranged ...
Description:
Switches suitable for PCB mounting with pins arranged on a 01 in pitch grid Right angle versions have two additional support pins Ideal where either panel space or board size is at a premium Suitable for low level switching applications ...
Silver contacts Solder terminals Terminals epoxy sealed against ...
Description:
Silver contacts Solder terminals Terminals epoxy sealed against flux and dirt Brass actuator and Diallyl Phthalate case