PCB Handling

Within the RS range of PCB handling products, you'll find PCB card guides, brackets, PCB card inserters, extractors and ejectors from leading industry brands such as Richco.
Related Products
The Hammond 1591 series is a multi-purpose plastic ...
Description:
The Hammond 1591 series is a multi-purpose plastic enclosure ideally suited for mounting printed circuit boards (PCBs) horizontally. The internal sides of the enclosure are smooth for easy connector installation. Each enclosure has 2 PC board standoffs moulded into the ...
This range complements the IBM PC prototyping cards.Several ...
Description:
This range complements the IBM PC prototyping cards.Several types are offered, depending on the connectors mounted on the cards. These brackets are made from 0.8 mm thick nickel-plated steel.
Type 2: L.204, W.15, H8.Type 3: L.204, W. ...
Description:
Type 2: L.204, W.15, H8.Type 3: L.204, W. 21, H.13. Type 2 PCB guides are stick on guides which accept 1.6mm thick PCBs which are held at the edge of the guide.Type 3 horizontal hold-down strips, are stick on strips ...
Vertically mounted card rails for 1.6 mm-thick PCBs. ...
Description:
Vertically mounted card rails for 1.6 mm-thick PCBs. Install by securing with screws (M3). Two nodules in the guide groove prevent vibrations and stop the PCB from shifting position. The double rails mean you can align the boards side by ...