Bearing Pullers

When compounds that are held together by their own frictional forces need to be separated, you will need to reach for a set of pullers or separators in order to pull them apart. At RS Components, we have a varied range of reliable pullers, separators and extraction tools, as well as insertion tools and puller accessories.


What types of Pullers are there?


There are several types of pullers available, including mechanical pullers, bearing pullers, hydraulic pullers, strong back pullers, and heavy-duty jaw pullers, all of which you can find here with RS Components.


Mechanical pullers are used to replace the bearing, pulley couplings or other parts that fit together in a similarly close fashion without having to dismantle machinery or remove the running shaft. There are three-arm or two-arm versions, with three arms providing better load distribution and a concentric pulling action and two-arms suitable for confined spaces.


Bearing pullers are specifically-designed tools for removing or installing bearings from rotating machine shafts or from blind bearing holes. Dependent on the size of the puller, the application can vary dramatically, ranging from the transmission to complicated industry machinery.


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring-operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user-friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


...
Read more Read less

Filters

Viewing 21 - 40 of 92 products
Results per page
Description Price Capacity Puller Type Hydraulic Force Operation Number of Pieces
RS Stock No. 237-776
Mfr. Part No.GEDORE 9.00/3
BrandGedore
$392.88
1 Kit
Kit(s)
40 → 120 Spread mm Bearing Puller 2.0t Lever Press 3
RS Stock No. 236-7664
Mfr. Part No.U.20BPB
BrandFacom
$603.57
Each
units
260 mm Bearing Puller - Gear -
RS Stock No. 737-2835
Mfr. Part No.71050010
BrandSTAHLWILLE
$222.52
Each
units
22 mm Bearing Puller - Hand -
RS Stock No. 237-811
Mfr. Part No.GEDORE 1.06/ 2-E
BrandGedore
$332.92
Each
units
160 mm Bearing Puller - Gear -
RS Stock No. 434-2566
BrandRS PRO
$96.54
Each
units
50 mm Bearing Puller - Hand 2
RS Stock No. 122-2295
Mfr. Part No.BHP1752
BrandEnerpac
$6,309.54
Each
units
- Bearing Puller 8.0t Hydraulic -
RS Stock No. 300-6225
Mfr. Part No.U.301
BrandFacom
$138.27
Each
units
80 mm Bearing Puller - Hand -
RS Stock No. 237-754
Mfr. Part No.GEDORE 1.13/01
BrandGedore
$131.73
Each
units
60 mm Bearing Puller - Lever Press -
RS Stock No. 124-8470
Mfr. Part No.TMSC-10
BrandSKF
$225.35
Each
units
- Bearing Puller - Hand -
RS Stock No. 349-7312
BrandRS PRO
$58.23
Each
units
200 mm Bearing Puller - Lever Press -
RS Stock No. 349-7299
BrandRS PRO
$36.12
Each
units
100 mm Bearing Puller - Lever Press -
RS Stock No. 845-8359
Mfr. Part No.TMMP 2X170
BrandSKF
$237.84
Each
units
170.0 mm Bearing Puller 2.0t Hand -
RS Stock No. 669-8215
Mfr. Part No.U.306-180
BrandFacom
$461.13
Each
units
180 mm Bearing Puller - Gear -
RS Stock No. 732-4785
Mfr. Part No.TMMX 350
BrandSKF
$112.20
Each
units
- Protection Blanket - - -
RS Stock No. 847-8243
Mfr. Part No.1656996
BrandGedore
$92.39
Each
units
50.0 mm Bearing Puller - Lever Press -
RS Stock No. 885-5322
Mfr. Part No.729101/400MPA
BrandSKF
$7,316.28
Each
units
200.0 cm³ Bearing Puller 400.0MPa Hand -
RS Stock No. 124-8431
Mfr. Part No.TMHP10E
BrandSKF
$1,332.27
Each
units
- Bearing Puller - Hydraulic 15
RS Stock No. 125-3889
Mfr. Part No.1.06/1A1-B
BrandGedore
$198.02
Each
units
140 (External) mm, 180 (Internal) mm Bearing Puller - Lever Press -
RS Stock No. 489-3402
Mfr. Part No.10504634
BrandIrwin
$78.27
Each
units
10 → 16 mm Bearing Puller - Hand -
RS Stock No. 669-8206
Mfr. Part No.U.232J2
BrandFacom
$346.94
Each
units
30 → 60 mm, 60 → 122 mm Bearing Puller - Gear 2
Related Products
2 Leg Standard Bearing Puller 2 Leg puller ...
Description:
2 Leg Standard Bearing Puller 2 Leg puller with quick release hooks Safe and quick removal of pulleys, wheels, ball bearings etc Strong drop forged pattern Reversible hooks for internal or external pulling Spindle can be changed for a hydraulic ...
Irwin Bolt Grip Expansion Set Bolt Grip fastener ...
Description:
Irwin Bolt Grip Expansion Set Bolt Grip fastener removers from Irwin Designed with a reverse spiral flute which securely grips and removes stubborn nuts and bolts. Suitable for use with a hand ratchet 3/8 in square drive and has hexagon ...
Irwin Bolt Grip Expansion Set Bolt Grip fastener ...
Description:
Irwin Bolt Grip Expansion Set Bolt Grip fastener removers from Irwin Designed with a reverse spiral flute which securely grips and removes stubborn nuts and bolts. Suitable for use with a hand ratchet 3/8 in square drive and has hexagon ...
Extractor with large claws Ergonomic handle for better ...
Description:
Extractor with large claws Ergonomic handle for better hand grip, easy opening and positioningEnergy limiter fuse triggered when the applied force is too high, preventing damage to parts.Can be used with an inert mass of U.49AM for each U.301E1 end ...