Manual Grease Guns | RS
Recently searched

    Manual Grease Guns

    Check out our handy grease guns guide to learn how to use a grease gun and pick the right product for your task.

    What are Grease Guns?

    A grease gun is an effective tool for moving grease to a point of application. The close fitting of the apertures ensures that lubricant is applied only where needed.

    Types of Grease Guns

    • Lever Grease Gun -One of the most popular varieties of grease guns is the lever-operated type. Simply pulling the lever will create enough pressure to force the grease from the gun so that it can be applied to the relevant areas. Varying the length of the lever stroke will enable you to adjust the amount of grease that is dispensed
    • Hand Pump - Using hand pump grease guns will involve operating a pump on the top of the gun. This will create a buildup of air within the tool, which will create the pressure necessary to force the grease from within the gun
    • Air-Powered Grease Gun - These are mainly used on large commercial projects due to the force with which the grease is dispensed. These types of gun are powerful because they are attached to an air compressor by a hose, which creates the pressure to force the grease from the gun. Shop Air Grease Guns Here
    • Battery Powered Grease Gun - A Grease gun that is battery powered will ensure that it is easier to use since the power source will provide the energy needed to dispense the grease, rather than the exertion falling solely to your hand Shop Battery Grease Guns Here

    20 Products showing for Manual Grease Guns

    RS PRO
    120 cm³
    Steel
    -
    4 Jaw
    -
    2500psi
    RS PRO
    85 g
    Steel
    -
    4 Jaw
    -
    3500psi
    RS PRO
    16 oz
    Steel
    -
    4 Jaw
    -
    7000psi
    RS PRO
    -
    -
    -
    -
    -
    -
    Bahco
    450 g
    -
    413bar
    -
    -
    413bar
    SKF
    500 cm³
    -
    Maximum of 300bar
    -
    -
    300bar
    DeWALT
    400 ml
    -
    690bar
    -
    -
    690bar
    Facom
    500 ml
    -
    -
    -
    -
    -
    SKF
    500 cm³
    Steel
    -
    -
    -
    400bar
    SKF
    500 cm³
    -
    Maximum of 400bar
    -
    -
    400bar
    SAM
    -
    Steel
    -
    -
    -
    -
    Makita
    -
    -
    -
    -
    -
    -
    Facom
    500 ml
    Galvanised Steel
    -
    -
    -
    -
    THK
    70 g
    -
    -
    -
    -
    -
    SAM
    500 ml
    Steel
    -
    -
    -
    -
    Facom
    150 ml
    Steel
    -
    -
    -
    200bar
    SAM
    500 ml
    Steel
    -
    -
    -
    -
    SAM
    0.31-0.4 L
    Aluminium
    -
    -
    -
    -
    SAM
    -
    Steel
    -
    4 Jaw
    -
    -
    Facom
    -
    Aluminium
    2 → 8bar
    -
    2bar
    8bar
    Results per page