enCoRe II USB Controller 5V SOIC18
- RS Stock No.:
- 125-7544
- Mfr. Part No.:
- CY7C63813-SXC
- Brand:
- Cypress Semiconductor
Stock information currently inaccessible
- RS Stock No.:
- 125-7544
- Mfr. Part No.:
- CY7C63813-SXC
- Brand:
- Cypress Semiconductor
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Cypress Semiconductor | |
| Select all | ||
|---|---|---|
Brand Cypress Semiconductor | ||
USB 2.0-USB-IF certified (TID # 40000085)
EnCoRe™ II USB - ’enhanced Component Reduction’
Crystal less oscillator with support for an external clock. The internal oscillator eliminates the need for an external crystal or resonator
Two internal 3.3 V regulators and an internal USB Pull-up resistor
Configurable I/O for real world interface without external components
USB Specification compliance
Conforms to USB Specification, Version 2.0
Conforms to USB HID Specification, Version 1.1
Supports one low speed USB device address
Supports one control endpoint and two data endpoints
Integrated USB transceiver with dedicated 3.3 V regulator for
USB signalling and D– pull-up
Enhanced 8-bit microcontroller
Harvard architecture
M8C CPU speed is up to 24 MHz or sourced by an external clock signal
Internal memory
Up to 256 bytes of RAM
Up to eight Kbytes of flash including EEROM emulation
Interface can auto configure to operate as PS/2 or USB
No external components for switching between PS/2 and USB modes
No General Purpose I/O (GPIO) pins required to manage dual mode capability
Low power consumption
Typically 10 mA at 6 MHz
10 μA sleep
In system re programmability
Allows easy firmware update
EnCoRe™ II USB - ’enhanced Component Reduction’
Crystal less oscillator with support for an external clock. The internal oscillator eliminates the need for an external crystal or resonator
Two internal 3.3 V regulators and an internal USB Pull-up resistor
Configurable I/O for real world interface without external components
USB Specification compliance
Conforms to USB Specification, Version 2.0
Conforms to USB HID Specification, Version 1.1
Supports one low speed USB device address
Supports one control endpoint and two data endpoints
Integrated USB transceiver with dedicated 3.3 V regulator for
USB signalling and D– pull-up
Enhanced 8-bit microcontroller
Harvard architecture
M8C CPU speed is up to 24 MHz or sourced by an external clock signal
Internal memory
Up to 256 bytes of RAM
Up to eight Kbytes of flash including EEROM emulation
Interface can auto configure to operate as PS/2 or USB
No external components for switching between PS/2 and USB modes
No General Purpose I/O (GPIO) pins required to manage dual mode capability
Low power consumption
Typically 10 mA at 6 MHz
10 μA sleep
In system re programmability
Allows easy firmware update