WAGO 221 Series Lever Connector, 2-Way, 41A, 20 → 10 AWG Wire, Cage Clamp Termination

Are you looking for a one-stop-shop solution for terminating your wires? Choose this terminal block from WAGO. It clasps firmly onto wires ranging in size between 20 and 10AWG, so it's a versatile choice. Thanks to the spring cage connection, finishing your cabling is as simple as pulling up a lever, inserting the wire and pressing down to establish a firm grip. Once connected, insert your cables into a mounting unit to power up your system.

• Copper contact material is highly conductive for a reliable connection
• Transparent housing lets you quickly check wires are appropriately inserted
• Two test slots simplify electrical and insulation testing after installation

• HVAC systems
• Manufacturing industry
• Commercial lighting

Several accessories work with this terminal block to further simplify your wiring jobs. For example, if you need to plug your cables into a DIN rail, use a mounting carrier (247-5861) and strain relief plate (758-1663) to get the job done. If you need a connector that simplifies screw mounting, use a screw-type connector (175-0361) instead.