SMC Solenoid Valve VX233ALAXB, 2 port , NC, 230 V ac, 1/4in

  • RS Stock No. 873-2594
  • Mfr. Part No. VX233ALAXB
  • Manufacturer SMC
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): JP
Product Details

VX21-22-23 Two Port Direct Operating Solenoid Valve

The SMC VX 2 Port Direct Operated Solenoid Valve is suitable for use with air, water, oil and medium vacuum environments. Air models are available with aluminium or resin bodies, while water/oil/medium vacuum models are available with brass or stainless steel bodies.

Benefits over conventional SMC solenoid valve:

Large flow rate (20% more for Size 1* model)
More compact body (Size 1* is 10% smaller)
Light weight (30% lighter: aluminium body, Size 1* model)
Reduced power consumption when compared with SMC conventional model

Built-in Full Wave Rectifier (for AC models)

The SMC AC solenoid valve models offer an improved OFF RESPONSE, LOW NOISE construction, IMPROVED DURABILITY, REDUCED BUZZ noise and an overall REDUCTION in APPARENT POWER.

The VX solenoid valve is suitable for use within environments from -10 to +60°C

Note

*Size 1 solenoid valve models are denoted by SMC part number commencing "VX214"; Size 2: "VX224"; Size 3: VX234

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 1/4 in G Female
Connection Size 1/4in
Default Valve Position NC
Suitable Applications Oil
Type 2/2
Orifice Diameter 5mm
Body Material Brass
Maximum Working Pressure 1 MPa
Operating Temperature Range -20 → +60 °C
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Connection Gender Female
Series VX23
Thread Standard or Connection Type G
1 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each
$ 116.06
(exc. GST)
$ 127.67
(inc. GST)
units
Per unit
1 +
$116.06
Related Products
Stainless steel bodied, 3-way, Type 330 Solenoid valves ...
Description:
Stainless steel bodied, 3-way, Type 330 Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in ...
PP and PVDF, 2 and 3 way, Type ...
Description:
PP and PVDF, 2 and 3 way, Type 124 Solenoid valves with pivoted armatures Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments Duty cycle intermittent operation 40% 30 min8W nominal coil power ...
Series 255 Two Way Normally Closed Solenoid Valves ...
Description:
Series 255 Two Way Normally Closed Solenoid Valves For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents Heat-resistant slip-over epoxy encapsulated coil Brass body and PTFE Seal Three-pin DIN connector rated to IP65 can be ...
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct ...
Description:
Two-way, N/C, Gas Pilot/Burner Control Valves Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection Pressure not required for operation Compact & lightweightISO ...