Digilent 410-249 Programmer Adapter for use with Xilinx FPGAs

  • RS Stock No. 134-6458
  • Mfr. Part No. 410-249
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-HS2 FPGA Programming Cable

The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC.

Features

• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB
• JTAG connector: 0.1in 6-pin
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK

Supported Target Devices

• Xilinx FPGAs
• Xilinx Zynq-7000
• Xilinx CoolRunner™/CoolRunner-II CPLDs
• Xilinx Platform Flash ISP configuration PROMs
• Selected third-party SPI PROMs
• Selected third-party BPI PROMs

Target Devices Not Supported

• Xilinx 9500/9500XL CPLDs
• Xilinx 1700 and 18V00 ISP configuration PROMs
• Xilinx FPGA eFUSE programming

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

Xilinx JTAG 2 x 7-pin 2mm connector adapter, USB cable

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Accessory Type Programmer Adapter
For Use With Xilinx FPGAs
35 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 89.87
(exc. GST)
$ 98.86
(inc. GST)
units
Per unit
1 +
$89.87
Related Products
A surge protector designed to protect any RS-232 ...
Description:
A surge protector designed to protect any RS-232 port from the possibility of low level induced mains voltage transients. The ABS-bodied surge protector uses metal oxide varistors (MOV’s) to protect pins 2, 3, and 7.,It has one male and one ...
USB to Serial adapter provides 2 RS232 serial ...
Description:
USB to Serial adapter provides 2 RS232 serial ports. Data transfers rates up to 921,600 baud rates and the 128 byte transmit and 384 byte receive FIFOS, coupled with 1Mbit line drivers, deliver uncompromising performance on your laptop/PC. 2 Port ...
The ultra small USB to serial adapter US-159 ...
Description:
The ultra small USB to serial adapter US-159 has 2kV of isolation, protecting from high voltage spikes and ground potential difference. 1 Port Isolated USB to RS232 Serial AdapterBaud rate up to 460 kBaudReliable, stable, native com port solution because ...
Six communication modules for use with FX3U PLCs. ...
Description:
Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can ...