WIZnet Inc, 48-Pin QFN, Ethernet Controller, 3.63 V 100 Mbps SPI 3.3V W5200, Full Duplex/Half Duplex
- RS Stock No.:
- 758-1048
- Mfr. Part No.:
- W5200
- Brand:
- WIZnet Inc
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 758-1048
- Mfr. Part No.:
- W5200
- Brand:
- WIZnet Inc
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | WIZnet Inc | |
| Product Type | Ethernet Controller | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Interface Type | SPI | |
| Standard Supported | No | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.9mm | |
| Width | 7mm | |
| Standards/Approvals | No | |
| Length | 7mm | |
| Minimum Supply Voltage | 3.63V | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand WIZnet Inc | ||
Product Type Ethernet Controller | ||
Maximum Data Rate 100Mbps | ||
Sub Type Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Interface Type SPI | ||
Standard Supported No | ||
Mount Type Surface | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 0.9mm | ||
Width 7mm | ||
Standards/Approvals No | ||
Length 7mm | ||
Minimum Supply Voltage 3.63V | ||
Automotive Standard No | ||
- COO (Country of Origin):
- KR
Ethernet Controllers
The 7100A device is an Ethernet controller SoC featuring an 'un-attackable' hardware network engine for preventing network attacks such as flooding, spoofing and injection. The W5200 device does not have the on-chip microcontroller and needs to be connected to an external host via an SPI serial bus.
iMCU W7100A Ethernet Controller SoC
8051-core SoC with hardwired TCP/IP protocol stack, MAC and PHY
Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE
Support for ADSL connection (PPPoE Protocol with PAP/CHAP Authentication mode support)
10BaseT/100BaseTX Ethernet PHY Embedded
Support for Auto-Negotiation (Full/Half Duplex)
Support for Auto-MDIX
Code memory: 2KB Boot ROM, 64KB Flash EPROM
Data Memory: 256B Flash EPROM, 64KB RAM
Memory Lock Function
Up to 4 x 8-bit GPIO Ports (3.3V logic level, 5V tolerant, with Pull-Up/Pull-Down)
Full-duplex UART
Programmable Watchdog Timer
DoCD & trade compatible debugger
Power-Down mode
Power supply: +3.0V to +3.6Vdc
Operating temperature range: -40 to +80°C
Package: QFN64 (RS 758-1045)
iEthernet W5200 Ethernet Controller
Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE
Support for ADSL connection (PPPoE Protocol with PAP/CHAP Authentication mode support)
10BaseT/100BaseTX Ethernet PHY Embedded
Support for Auto-Negotiation (Full/Half Duplex)
Support for Auto-MDIX
Host Communication: High Speed Serial Peripheral Interface (SPI Mode 0,3)
Internal 32KB RAM memory for TCP/IP packet processing
Power-Down mode with Wake-on-LAN
Power supply: +3.0V to +3.6Vdc
Operating temperature range: -40 to +85°C
Package: QFN48 (RS 758-1048)
Ethernet Communications
A range of Ethernet communications controllers, transceivers and switching ICs
Related links
- WIZnet Inc W5100 3.3 V 100 Mbps SPI, 80-Pin 3.3V LQFP
- Microchip LAN9252/ML 1.8 V 100 Mbps SPI 64-Pin 3.3V QFN
- Microchip LAN9252/PT 3.3 V 100 Mbps SPI, 64-Pin 3.3V
- Microchip 3.3 V 100 Mbps USB 2.0 64-Pin 3.3V QFN
- Microchip 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V QFN
- Microchip LAN9512-JZX 3.3 V 100 Mbps USB 2.0 64-Pin 3.3V QFN
- Microchip LAN9220-ABZJ 1.62 V 100 Mbps SMI 56-Pin 3.3V QFN
- Microchip LAN9252I/ML 3.3 V 100 Mbps Host Bus, 64-Pin 3.3V QFN