Phoenix Contact RIF-1-RSC-LDP-12DC/1X21 Series Interface Relay, DIN Rail, 12 V dc Coil, SPDT, (120 V ac) 4.5 mA, (110 V

View this category
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
Phoenix Contact RIF-1-RPT-LDP-12DC/1X21 Series Relay Module, DIN Rail, 12 V dc Coil, SPDT, 33 mA
RS Stock No.
890-3907

Each

$15.68

(exc. GST)

$17.25

(inc. GST)

RS Stock No.:
174-3563
Mfr. Part No.:
2908500
Brand:
Phoenix Contact
Find similar products by selecting one or more attributes.
Select all

Brand

Phoenix Contact

Coil Voltage

12 V dc

Product Type

Interface Relay

Contact Configuration

SPDT

Mount Type

DIN Rail

Series

RIF-1-RSC-LDP-12DC/1X21

Terminal Type

Screw

Switching Current

10 mA

Minimum Operating Temperature

-40°C

Switching DC Voltage

250 V dc

Coil Current

(120 V ac) 4.5 mA, (110 V dc) 4.2 mA

Switching AC Voltage

250 V ac

Maximum Operating Temperature

70°C

Contact Material

Silver Alloy

Standards/Approvals

IEC 60947-5-1

Length

16mm

Width

75 mm

Height

89mm

COO (Country of Origin):
CN
This time relay RIF-1-RSC-LDP-12DC/1X21 2908500 from Phoenix Contact is the cost-effective alternative to a PLC; with easy configuration and fast wiring.

Features and Benefits


  • Pre-assembled relay module

  • Screw connection

  • Consists of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket

  • Contact type:1 changeover contact

  • Time-saving potential distribution, thanks to plug-in bridges

  • Protection against operating errors due to manual operation that is lockable via screwdriver

  • Quick and error-free connection to the controller via system cabling

    • Safety


    When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

    Demands on the power supply


    Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

    Applications


    You can use the same electromechanical relay module design for both AC and DC switching module.

  • Electrical isolation

  • Voltage adjustment of frequently varying voltage levels

  • Power amplification

  • Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

    • Approvals


    IECEx, ATEX and Class 1 Zone 2

    Phoenix Contact RIF-1-RSC


    Related links