Phoenix Contact PT 1.5/S-QUATTRO Series Grey Feed Through Terminal Block, 0.14 → 1.5mm², Single-Level, Push In

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

50 % less insertion force
Direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Compact design and front connection facilitate wiring in the smallest of spaces
Double bridge shaft for an individual power distribution and supply
Uniform CLIPLINE complete standard accessory

Protect your electrical system from short circuits and overcurrent with this feed-through terminal block from Phoenix Contact. Its front connection method allows for ease of wiring in areas where space is limited.
The unit's push-in connectors allow for quick, tool-free wiring. As the push-in connectors require minimal insertion force, they're easy to use. A robust polyamide (PA) housing ensures resistance to corrosion and wear, so delivers a long service life. The unit is compatible with wires ranging in diameter from 26 to 16AWG (American Wire Gauge), making it a versatile choice.
You'll commonly find this type of terminal block used in railway and plant building applications, lighting controllers and building management systems.

• Accepts solid conductors and conductors with ferrules for versatility
• Compact dimensions of 63.2 (length) x 3.5 (width) x 30.5mm (height) to save space
• Wide operating temperature range of -60°C to +130°C for use in demanding environments
• UL 94-V0 flammability rating means it's self-extinguishing in the event of a fire
• Meets DIN EN 50274 safety standards for low-voltage switchgear, protecting users against direct contact with live parts

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.