Weidmuller 1021500000 WDK Series Dark Beige, 2.5mm², Double-Level, Screw Termination

A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers.,A 10 way jumper bar is available. End cover fits both terminals.

• Continuous operating temperature: -50 °C to 120 °C
• Material: Wemid

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

Join one or two conductors with this double-level terminal block from Weidmuller. Its two wire feeds enable you to connect complex equipment and circuits without the need for separate modules. As it's made from a Wemid thermoplastic material, it insulates your components against electrical damage and provides effective resistance to heat and wear. This material is also flame-retardant for safety in the event of a fire. Its rated impulse withstand voltage of 6kV means it can handle powerful spikes in voltage.

• Wide operating temperature range between -60°C and +130°C for use in harsh conditions
• Snap-on fixing for quick installation on a DIN rail
• Screw terminals for the secure clamping of wires
• Accepts wire sizes between 30 and 12AWG for versatility

• Industrial automation
• Process control
• HVAC systems
• Energy regulation

This double-level terminal block fits onto standard TS35 DIN rails. This means you can use it on top-hat rails for applications such as industrial and motor control circuits.

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.