Weidmuller, 2-Pole Jumper Bar, SAK Series

  • RS Stock No. 718-0932
  • Mfr. Part No. Q 2 SAK2.5 -337000000
  • Manufacturer Weidmuller
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SAK TS35 Range

High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 with a working temperature of -50°C to +100°C, and meet the requirements of IEC 60947-1.

Features and Benefits

• AP SAK End plates available in 4 sizes to suit 2.5 mm² to 35 mm² terminals • Partitions available in both beige (RS 755-3725) and blue (RS 718-0914, RS 718-0923, RS 718-0926)
• Flammability class UL 94V-2
• Clamping yoke technology

Approvals

CSA certified, UL listed, NEMKO, ATEX, and IECEx

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specifications
Attribute Value
Accessory Type 2-Pole Jumper Bar
Series SAK
For Use With Terminal Block
10 : Next working day (AU stock)
550 : 5 working days (Global stock)
Price (ex. GST) Each (In a Pack of 10)
$ 3.079
(exc. GST)
$ 3.387
(inc. GST)
units
Per unit
Per Pack*
10 +
$3.079
$30.79
*price indicative
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 25 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
For the termination of 3 wire sensors Common ...
Description:
For the termination of 3 wire sensors Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Standard or feed through rated at 750V Terminals ...
Description:
Standard or feed through rated at 750V Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs.
The 10 way jumper can have contacts selectively ...
Description:
The 10 way jumper can have contacts selectively broken off to omit some terminals from connectionJumper bars fit flush into the terminals and are capable of carrying the terminals rated current.For 2-way jumper bar see RS 226-0096 (4mm) or RS ...