TRACOPOWER TES 1 DC-DC Converter, 12V dc/ 85mA Output, 10.8 → 13.2 V dc Input, 1W, Surface Mount, +90°C Max Temp

The Traco Power TES 1 series is a range of isolated, 1 Watt, DC-DC converters in a small SMD package with standard footprint. With their small footprint these regulated converters are an ideal and economical solution for many applications where an isolated voltage is required. The TES 1 series feature a package design which qualifies these DC-DC converters for the higher temperatures requested by lead-free reflow solder processes. Typical applications of these isolated converters are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems.

Small SMD package with standard footprint
I/O isolation 1500 VDC
Single and dual output models
Input voltage 5, 12 and 24 VDC
High efficiency up to 80%
Operating temperature range –40°C to +85°C
High accuracy of pin co-planarity
Qualified for lead-free reflow solder process according IPC/JEDEC J-STD-020C

When the job calls for a circuit-board-mounting PSU with rock-solid isolation, pick this DC-DC converter from Traco Power. It takes a voltage ranging between 10.8 and 13.2V DC and transforms it to provide a stable load of 12V DC for charging kit that runs on batteries. Thanks to its compact, industry-standard SMD8 footprint of 13.7 (L) x 8.4 (W) x 7.2mm (D), it's a piece of cake to fit directly on your PCB. Isolation to 1.5kV DC on both the input and output means this product also shields you and your equipment from harmful voltage surges.

• 79% efficient, so little energy's wasted as heat and there's no need for a fan or heatsink to keep it cool
• Operates safely in temperatures from -40°C to +90°C
• Mean time between failures of 2 million hours, so you know it's a long-lasting pick

• Renewable energy
• Smart lighting
• Industrial process control

In addition to the unit's high isolation rating, you can expect its short-circuit breaking to prevent current faults from causing injury or device damage. This converter uses non-conductive housing materials for its case and baseplate, so you can also be sure it's shockproof.