Knipex, 97 Crimping Die Set, HTS / Harting connector

RS Stock No.:: 336-8157
Mfr. Part No.:: 97 49 60
Brand:: Knipex

Knipex, 97 Crimping Die Set, HTS / Harting connector

This image is representative of the product range

Bulk discount available

Subtotal (1 unit)**

$268.38

(exc. GST)

$295.22

(inc. GST)

1 In Global stock for delivery within 10 working day(s)*

* Delivery dates may change based on your chosen quantity and delivery address.

FREE delivery for orders over $60.00 ex GST

Real time qty checker

Units	Per unit
1 - 4	$268.38
5 +	$241.54

**price indicative

RS Stock No.:: 336-8157
Mfr. Part No.:: 97 49 60
Brand:: Knipex

Crimp Die Set 97 49 60

Profile jaws for crimp system tool KNIPEX 97 43 200 (stock no. 336-8084)
Profile for turned contacts, 0.14 → 4 mm²
Positioning Aid 97 49 90

Crimp die set 97 49 60

Knipex universal crimping die 97 43 200 / RS 336-8084

For turned contacts (HTS + Harting) from 0.14 to 4mm² - AWG 26 to 11.

Dies are machined and engraved with the cable section
The dies are fixed with a screw.

Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages :

Interchangeable crimping dies
One tool for almost 1,000 different crimps
Virtually parallel crimping mechanism
Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)
Crimping pressure is precisely set at the factory (calibrated), adjustable
Increased force due to lever transmission for less tiring work

Features and benefits :

Parallel crimping
Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications
Over 1000 interchangeable dies.

Weight: about 40g

Special quality oil-hardened vanadium chrome electric steel

Maintenance tips :

Product maintenance

To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

The setting of the crimping die ranges should also be checked.

Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil.

Importance of high quality crimping
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Knipex
	Crimp Connector Type	HTS / Harting connector
	Minimum Wire Size mm²	0.14mm²
	Maximum Wire Size mm²	4mm²
	Minimum Wire Size AWG	26AWG
	Maximum Wire Size AWG	12AWG
	Terminal Insulation	Uninsulated
	Number of Ports	4
	Series	97
	For Use With	Universal crimping plier - 97 43 200

	Select all
	Brand Knipex
	Crimp Connector Type HTS / Harting connector
	Minimum Wire Size mm² 0.14mm²
	Maximum Wire Size mm² 4mm²
	Minimum Wire Size AWG 26AWG
	Maximum Wire Size AWG 12AWG
	Terminal Insulation Uninsulated
	Number of Ports 4
	Series 97
	For Use With Universal crimping plier - 97 43 200