RS PRO, 2A Ceramic Cartridge Fuse, 5 x 20mm, Speed F

  • RS Stock No. 563-413
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO Quick Acting (F) HBC - Ceramic 5x20mm

RS PRO range of miniature ceramic cartridge fuses which are fast acting (F) and are ideal for providing protection to devices or internal circuits from short circuits and overcurrent. They are deliberately weaker components which, when too much current is drawn, will blow. Once the fuse has blown it will need replacing in order to make the circuit complete and allow the flow of current.
Fuses are less expensive and react faster than a circuit breaker. However circuit breakers can be reset after they trip but a fuse will have to be replaced once it blows.
RS PRO cartridge fuse packs are available in a range of current ratings with varying resistance values to suit all your requirements. This range is reliable for a broad range of applications.

Features:
Miniature ceramic cartridge
F Speed rated
5mm x 20mm cartridge size
Cylindrical shape

Typical applications:
Cartridge fuses are a relatively cheap way of protecting electrical equipment from short circuits and overcurrent and can be used to protect electrical appliances such as motors air-conditions, refrigerator, pumps etc. They can be found in the following areas:
Industrial
Commercial
Home/Residential
Automotive

Additional Information
What size is it?
5x20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5x20 fuse holder.

What Speed is it?
These fuses are “F” speed rated, which is short for Fast Acting. This is also known as fast blow and is popular in general purpose applications. They are designed not to handle current spikes over the rated current.

What are fuses used for?
• For the protection of components and equipment from costly damage caused by over-current.
• To isolate sub-systems from the main system once a fault has appeared

What is an over-current?
It is a setting where a circuit experiences a current that is higher than the normal operating current.

What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is HBC (High Breaking Capacity).

Approvals

7777

Very high breaking capacity
Good mechanical/vibration characteristics
Ceramic cartridge bodies are sand filled

Typical Applications include short-circuit protection of semiconductors such as thyristors, diodes and triacs.
Note that with values of greater than 6.3A the use of open type fuseholders is recommended, to reduce the risk of nuisance tripping at or near full rated current.

Specifications
Attribute Value
Current Rating 2 A
Fuse Size 5 x 20mm
Fuse Speed F
Voltage Rating 250 V ac
Body Material Ceramic
540 In stock for delivery within 5 working day(s) (Global Stock)
Price (ex. GST) Each (In a Pack of 10)
$ 0.246
(exc. GST)
$ 0.271
(inc. GST)
units
Per unit
Per Pack*
10 - 90
$0.246
$2.46
100 - 490
$0.234
$2.34
500 - 990
$0.222
$2.22
1000 - 2490
$0.211
$2.11
2500 +
$0.20
$2.00
*price indicative
Related Products
SITOR Cylindrical Fuses, Size 14 x 51 mm, ...
Description:
SITOR Cylindrical Fuses, Size 14 x 51 mm, Type aR Semiconductor protection fuses, 3NC1 Series Operating class aR (full-range semiconductor protection)For protecting high-quality devices and components, such as semiconductor contactors, electronic relays (solid state), converters with fuses in input and ...
D1 TD Fuses Super time-delayed 5 x 20 ...
Description:
D1 TD Fuses Super time-delayed 5 x 20 mm fusesLow breaking capacity.Glass tube, protected terminals. Standards NF C 93435 -HA20 -CCQ; GAM T1 / French Navy, LNZ - UL listed: E42088. Super time-delayed 5 x 20 mm fuses.Low breaking capacity.Glass ...
SP Series Professional range of Schurter fuses from ...
Description:
SP Series Professional range of Schurter fuses from the SP series The fuses are available in a variety of current ratings. Pigtail Type Nickle Plated Copper Alloy endcaps CeramicCylindrical Mounting Style - Holder/Clip. Professional range of Schurter fuses from the ...
Schurter SPT Fuses Standard miniature fusePCB or THT ...
Description:
Schurter SPT Fuses Standard miniature fusePCB or THT mounting Standards IEC 60127-3 / 4, UL 248-14, CSA C222 no. 248.14 Approvals UL Recognised, VDE approved. The Schurter SPT 3.6x10 standard miniature cartridge fuse has a ceramic cylindrical body with 250VAC ...