Stud Cam Follower KR 19PP, 8mm ID, 19mm OD

This SKF stud cam follower is used in systems such as cam drives that convert rotary motion into linear motion. It has a thick outer ring and can handle heavy shock loads. That means it's suitable for use in applications that require rapid acceleration or deceleration. The unit features a needle roller to reduce friction on the rotating surface. This thin, cylindrical roller also provides more contact with the races, giving the follower the ability to support a greater load.

• Concentric ring slide and track system bearing type
• Bore size of 8 mm
• Dynamic load rating of 4180 N
• Static load rating of 4750 N
• Concentric roller diameter of 19 mm
• Roller length of 11 mm

• Automobile manufacturing
• Air compression
• Tooling and machining

You can secure this stud cam follower onto a machine frame with a nut. Use an Allen key in the hexagonal recess in the head of the stud to hold it in place while the nut is tightened.

This unit has a re-lubrication hole at its head and can be greased with a pressed-in grease fitting accessory from SKF.