onsemi, AC-DC Converter 650mA 7-Pin, PDIP NCP1076ABP100G

View all AC-DC Converters
Unavailable
RS will no longer stock this product.
RS Stock No.:
178-4330
Mfr. Part No.:
NCP1076ABP100G
Brand:
onsemi
Find similar products by selecting one or more attributes.
Select all

Brand

onsemi

Maximum Input Voltage

10 V

Mounting Type

Through Hole

Pin Count

7

Dimensions

10.16 x 7.11 x 4.95mm

Maximum Output Current

650mA

Package Type

PDIP

Input Voltage Range

-0.3 → 10 V

Minimum Input Voltage

-0.3 V

Maximum Operating Temperature

+150 °C

Length

10.16mm

Width

7.11mm

Height

4.95mm

Output Current Range

650 mA

Operating Temperature Range

Maximum of +150 °C

COO (Country of Origin):
CN
The NCP1076A & NCP1076B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).

Up to 30W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


Related links